Hello.
We have a ProLiant BL460c G6, that have some Firmware warnings on the Ilo - and that a disk drive firmware is recommended:
POST Error: 1770-Slot X Drive Array - Disk Drive Firmware Update Recommended
I have found 3 pieces of firmware, that im going to install:
P400 Firmware 6,40 -> 7,24 (B)
DG0300FARVV Unknow firmware -> HPDG (B)
EG0300FAWHV Unknow firmware -> HPDF (B)
The disks are in a Raid 1, and the server have a SB40c Storageworks connected also, with Raid 5.
Im aware that the servers VMs should be closed, and that the server will require a reboot.
I was thinking about updating the storage controller first, then reboot.
Then take the disk seperately, and reboot after each firmware update.
Now im wondering, is this the right way to proceed?
Will the Raid 1 be detrued afterwards? will i have to rebuild? will any data be lost? Will this effect the Storageworks?
The server is in a C3000 with firmware 3.30
Any help and suggestions would be really appreciated! :)
