Hi,
I'm trying to enable syslog on a iLO4 1.51 from command line, using hponcfg v4.2.0 under CentOS 6.5.
I've successfully configured REMOTE_SYSLOG_SERVER_ADDRESS and REMOTE_SYSLOG_PORT, but I still can't switch REMOTE_SYSLOG_ENABLE to Y :
# cat << EOF |hponcfg -i> <RIBCL VERSION="2.0">> <LOGIN USER_LOGIN="xxx" PASSWORD="xxx">> <RIB_INFO MODE="write" >> <MOD_GLOBAL_SETTINGS>> <REMOTE_SYSLOG_ENABLE VALUE="Y" />> </MOD_GLOBAL_SETTINGS>> </RIB_INFO>> </LOGIN>> </RIBCL>> EOF
HP Lights-Out Online Configuration utility
Version 4.2.0 Date 6/10/2013 (c) Hewlett-Packard Company, 2013
Firmware Revision = 1.51 Device type = iLO 4 Driver name = hpilo</-- ERROR : STATUS= 0x00BE
MESSAGE= Tags for Remote Syslog cannot be empty. -->
Script failed
#
And here's the full GET_GLOBAL_SETTINGS output :
<GET_GLOBAL_SETTINGS><!-- A session timeout value of zero means that the timeout is set to infinite. --><SESSION_TIMEOUT VALUE="0"/><ILO_FUNCT_ENABLED VALUE="Y"/><F8_PROMPT_ENABLED VALUE="Y"/><F8_LOGIN_REQUIRED VALUE="N"/><HTTPS_PORT VALUE="443"/><HTTP_PORT VALUE="80"/><REMOTE_CONSOLE_PORT VALUE="17990"/><VIRTUAL_MEDIA_PORT VALUE="17988"/><SNMP_ACCESS_ENABLED VALUE="Y"/><SNMP_PORT VALUE="161"/><SNMP_TRAP_PORT VALUE="162"/><SSH_PORT VALUE="22"/><SSH_STATUS VALUE="Y"/><SERIAL_CLI_STATUS VALUE="Enabled-Authentication Required"/><SERIAL_CLI_SPEED VALUE="115200"/><VSP_LOG_ENABLE VALUE="Y"/><MIN_PASSWORD VALUE="8"/><AUTHENTICATION_FAILURE_LOGGING VALUE="Enabled-every 3rd failure"/><LOCK_CONFIGURATION VALUE="N"/><RBSU_POST_IP VALUE="Y"/><ENFORCE_AES VALUE="N"/><IPMI_DCMI_OVER_LAN_ENABLED VALUE="Y"/><REMOTE_SYSLOG_ENABLE VALUE="N"/><REMOTE_SYSLOG_PORT VALUE="514"/><REMOTE_SYSLOG_SERVER_ADDRESS VALUE="log.mydomain.tld"/><ALERTMAIL_ENABLE VALUE="N"/><ALERTMAIL_EMAIL_ADDRESS VALUE=""/><ALERTMAIL_SENDER_DOMAIN VALUE=""/><ALERTMAIL_SMTP_PORT VALUE="25"/><ALERTMAIL_SMTP_SERVER VALUE=""/><PROPAGATE_TIME_TO_HOST VALUE="N"/></GET_GLOBAL_SETTINGS>
Does anyone know what I'm missing ?
Cheers,