Hi All,
We have a problem which has sporadically reoccured over the past year.
Issue:
All fans "reported" to have being removed from the motherboard/disconnected. This is when it is racked and plugged in - so not possible that any fans have been removed from the system at all.
Event Viewer Information:
WBEM Indication Properties
AlertingElementFormat: 2 0x2 (CIMObjectPath)
AlertingManagedElement: "\\----\root\HPQ:HP_WinCoolingCollection.InstanceID="HPQ:HP_WinCoolingCollection:001""
AlertType: 5 0x5 (Device Alert)
Description: "A fan has been removed. (Fan 3)"
EventCategory: 23 0x17 (System Cooling)
EventID: "1"
EventTime: "20140912090558.001000+000"
ImpactedDomain: 4 0x4 (System)
IndicationIdentifier: "{60DB08AB-EE47-4543-964E-7EECEBB2E0AD}"
IndicationTime: "20140912100557.938000+060"
NetworkAddresses[0]:
NetworkAddresses[1]:
NetworkAddresses[2]:
NetworkAddresses[3]:
NetworkAddresses[4]:
OSType: 103 0x67 (Microsoft Windows Server 2008 R2)
OSVersion: "6.1.7601"
PerceivedSeverity: 2 0x2 (Information)
ProbableCause: 1 0x1 (Other)
ProbableCauseDescription: "Fan Removed"
ProviderName: "HP Cooling"
ProviderVersion: "2.6.0.0"
RecommendedActions[0]: "Check the fan configuration and ensure that this fan was removed intentionally."
Summary: "Fan removed"
SystemCreationClassName: "HP_WinComputerSystem"
SystemFirmwareVersion[0]: "2010.09.06"
SystemGUID: "15C9FFAE-7DAE-0BE9-AE7D-E90BB3FB69FF"
SystemModel: "ProLiant DL120 G6"
SystemName: " "
SystemProductID: "599148-425"
SystemSerialNumber: "CZ1110035B"
TIME_CREATED: 130549863630086607 0x1cfce68c725a1cf
For more information, please contact HP Support.
-----------------------------------------------------------------------------------------------
Fan 4 has been removed. (and same for 1,2,3)
-----------------------------------------------------------------------------------------------
System Information Agent: Health: Fan Removed. A hot-plug fan has been removed from the system.
Chassis: '0'; Fan: '5'
[SNMP TRAP: 6039 in CPQHLTH.MIB]
Currently installed firmware on Server (which is ProLiant DL120 G6)
Firmware Name Version
Management Processor Firmware (Active) 4.33
System ROM Firmware-O26 (Active) 2010.09.06
HP NC107i PCIe Gigabit Server Adapter #2 3.35.0
HP NC107i PCIe Gigabit Server Adapter 3.35.0
Disk Drive Firmware HPG0
Disk Drive Firmware HPG2
Array Controller Firmware 1.36
I have looked around and can't find any possible cause for this issue. I don't want to take the server offline and check internally at present as its a busy server, but was hoping someone may be able to kindly shed some light on the problem / recommend and troubleshooting steps.
I believe we are on the latest firmware for the server as there was an indication it could be firmware related, so this shouldn't be the issue.
If anyone could provide advice that would be great,
Tom