I have a ProLiant ML350 with a Smart Array 641 and 6 HDD's. 2 x 72.8 Gb and 4 x 146.8 Gb
There is NO Backup at the moment.
The original configuration was:
2 x 72.8 Gb, 1 logical drive, RAID 0, Operating System (Server 2008 32bit) (ID 0, 1)
1 x 146.8 Gb, 1 logical drive, Misc Data Drive (ID 2)
3 x 146. Gb, 1 logical drive, RAID5, Primary Data Drive (ID 3, 4, 5)
The drive ID3 was failing and it was removed from the server. The server used the RAID5 with only ID4 & ID5 for 2 days. However, half of the data was missing.
I have a new replacement drive and have attempted to run a rebuild. The RAID5 controller get's rebuilt, but stays on 0% when going to recover the logical drive.
Is there anything I can do? The original drive still powers on, is there a way to temporarily get the data accessible in order to run a backup?