Hi all,
In short:
1. Server = ML350G6 with P410i and 1GB cache
2. Server had RAID 5 (5 x 300GB SAS).
3. Backed up the server
4. Removed the drives & deleted the RAID from the RAID controller
5. Created a new RAID 1 with 2 x 1.2 TB SAS re-using some of the slots that were in use by the RAID 5.
6. Restored the server ... except that the backup drive is faulty (Aaaargh)
7. Now I need to remove the RAID 1 & recreate the RAID 5.
How can I recreate such a RAID? I still have the 5 x 300GB HDD.
Do I just insert the drives and create the RAID 5 and the RAID controller will just find the drives and check the RAID or is there a trick to this???
Alexandre