Hi.
I've got a strange problem with a Proliant ML350 G5 server that uses a e200i controller. I changed my hard disks from 72GB SAS Hot Plug to 600GB SAS Hot Plug... After this, when I power on my server, I obtain a message that says
"cmd=0h err=00h dlu=0AC:0h"
and the led on the hard disks are off. I also booted with Smart Start disk to verify my array and after the error no array can be founded by Smart Start.
If I put back on my old 72GB disks, everything works fine.
I found this problem on two ML350 G5 with e200i controller.
Any solution? I also updated all firmwares, BIOS etc. and I also removed cache memory from the controller.
