Hello,
I have big troubles with the fans turning at 70%.
The server is a DL180 Serial Number CZ3519XELF (and i have eleven more of them)
OS: CentOS 6.5
Inserted Cards:
PCI-E Slot 1 - TERMA Voice Announcer Card
PCI-E Slot 2 - HP Smart Array P440 Controller
PCI-E Slot 3 - HP Ethernet 1Gb 4-port 331T Adapter
PCI-E Slot 5 - Moxa RS 232 Card CP-102E
PCI-E Slot 6 - DeLock Parallel Port Card 89219
When i run the Server without any inserted PCIe Card (except the P440 ) the fans are silent after the start of the OS and running at 10%
When i insert the 1Gb 4-port 331T Adapter the fans are turning at 70% load. So i did a SPP Uprade (Version spp_2015.06.0) so i now System ROM U20 v1.40 (05/06/2015) iLO Firmware Version 2.20 May 20 2015. Since that the fans are also silent (10%) with this card inserted.
After inserting one of the other cards or all off them the fans are turning at 70% and they are making a lot of noise.
None of the cards needs a lot of power and i have the same configuration running in two DL360e G8 without that problem.
What should i do to make the fans running at 10%
Thanks, Best regards
Martin