Hi Folks!
I've got a DL380 G7 w/16 disks that I'd like to re-configure. Specifically, I need to reclaim some of the disks so that they can be used for a different logical disk. I'm having a hard time getting my head around this so any help would be appreciated :-)
Can this be done? How would I go about this? My existing configuration is below;
Array Status OK
Array A
Drive Type SAS
Logical Drive(s) / Local OS Access Name
Logical Drive 1 (350.0 GB, RAID 60 - NPG: 2) \\.\PhysicalDrive0
Logical Drive 2 (2.9 TB, RAID 60 - NPG: 2) \\.\PhysicalDrive1
Physical Drives
300 GB 2-Port SAS Drive at Port 2C : Box 1 : Bay 1
300 GB 2-Port SAS Drive at Port 2C : Box 1 : Bay 2
300 GB 2-Port SAS Drive at Port 2C : Box 1 : Bay 3
300 GB 2-Port SAS Drive at Port 2C : Box 1 : Bay 4
300 GB 2-Port SAS Drive at Port 3C : Box 1 : Bay 5
300 GB 2-Port SAS Drive at Port 3C : Box 1 : Bay 6
300 GB 2-Port SAS Drive at Port 3C : Box 1 : Bay 7
300 GB 2-Port SAS Drive at Port 3C : Box 1 : Bay 8
300 GB 2-Port SAS Drive at Port 4C : Box 2 : Bay 1
300 GB 2-Port SAS Drive at Port 4C : Box 2 : Bay 2
300 GB 2-Port SAS Drive at Port 4C : Box 2 : Bay 3
300 GB 2-Port SAS Drive at Port 4C : Box 2 : Bay 4
300 GB 2-Port SAS Drive at Port 5C : Box 2 : Bay 5
300 GB 2-Port SAS Drive at Port 5C : Box 2 : Bay 6
300 GB 2-Port SAS Drive at Port 5C : Box 2 : Bay 7
300 GB 2-Port SAS Drive at Port 5C : Box 2 : Bay 8
Spare Drives None
Failed Drives None
Device Path Smart Array P410i in Embedded Slot