I need some assistance. Our network is being changed and I have a HP DL380 Windows Server running Server Core 2012 R2 Datacenter. I was able to previously access the iLo through the web interface on this server. I worked with our network team to Re-IP the iLo from the web interface, then they plugged the connection into a new switch on a new vLan. I forgot to reset/refresh the iLo when doing so, and now cannot access the interface to this Server Core machine with the new IP. I had another Server Core machine and we did the same thing but this time I did reset/refresh the iLo and I was able to access the interface through the web. Great! So on the first Server Core, I suspect that by not doing the reset of the iLo led me to not be able to access it. Is there any way I can access the iLo settings to this Server Core to either put back the old IP and or/reset the iLo to have it use the new IP that has been set?
↧