Hi there,
I need to import the RAID0 array from one DL385G7 that's mainboard has died to another DL385G7.
The Server that died had 2xSata 500GB's in a RAID0 configuration - BBWC 410i controller.
I have removed these 2 drives and inserted them into 2 free bays in another server.
This server has 2 x RAID 1 arrays exported to the Operating system (which then uses them in a RAID0 Stripe i.e RAID10, but with software raid 0 management toolschain in Debian).
using hpacucli I see the two drives appearing as unassigned; I don't want to create a Logical Drive from them for fear of Wipping the Data.
Any help is appreciated:.
Dump of hpacucli config follows:
=> ctrl all show config
Smart Array P410i in Slot 0 (Embedded) (sn: 50014380102DA1D0)
array A (SATA, Unused Space: 0 MB)
logicaldrive 1 (931.5 GB, RAID 1, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 1TB, OK)
physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 1TB, OK)
array B (SATA, Unused Space: 0 MB)
logicaldrive 2 (931.5 GB, RAID 1, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 1TB, OK)
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 1TB, OK)
unassigned
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 500 GB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 500 GB, OK)