Hello, I've be given a ML150 G6 for personnal use, and was hurry to try soon bi xeon :D But the thing is that i'm facing an issue ... First, I only have DVI or HDMI plugged monitors, and had to put a graphic card to have video (Asus EN9400GT SILENT/HTP/512M ), and I've been told that even if there is no driver, i could have low res. video signal, so if NO it might be this the problem. But the previous owner told me that he moved jumpers to try fixing it, but don't remember which ones ! So one of the first things is, is there a way to find original position for jumpers ? My problem : - I plug AC power, normal button colour (orange when waiting to be pressed, then turns green) - When pressed, I get high speed fans (normal) but won't sow down - Got no image (though the TV recognize it's plugged but no signal) - I got several beeps but I don't know if it's HDD normal beeps or POST ones because they aren't that noisy, and thing is I've never faced POST beeps before :/ I Got : 13 short beeps, several times, then I got 2 shorts final beeps and no beeps anymore - I have 3 status light Clean / Tape / Drive (above USBs) and Clean is blinking orange - No other status led is on I'm quite a newbie in hardware, so do you have any clue about this ? Huge thanks in advance Paul FRANCE
↧