NC360T and DL380G4

Hi all,

Saturday I thought to add a NC360T to a DL380G4 but I had some difficulties. The slot was much longer than the connector on the NIC, the force needed to insert the NIc into the slot was quite high and I was afraid to bend and break something so I gave up.

Can anybody of you confirm that I can install such NIC in the server?

From this post, found after having tried to insert such card in the server,

http://h30499.www3.hp.com/t5/ProLiant-Servers-Netservers/Supported-NIC-cards-for-the-DL380-G4/td-p/702250#.UtVm2vTuLfs

I came up with this document

http://h18000.www1.hp.com/products/quickspecs/productbulletin.html#spectype=worldwide&type=html&docid=12028

Where the ni NC360T is mentioned

Just to give you an idea, the riser board is the following

http://www.ebay.fr/itm/HP-359248-001-Proliant-DL380-G4-PCI-X-Riser-Card-Plus-Assembly-Cage-/400498947970

Is the NC360T supposed to fin in there?

Otherwise which NIC should I buy?

I need it because one of the sockets doesn't retain the acble's plug any more.

Thanks,

Alex

P.S. This thread has been moved from ProLiant Servers – Netservers to ProLiant Servers (ML,DL,SL). -HP Forum Moderator