Hi,
I have a DL380 G6 that reboots at random.
ILO log shows only:
Server power restored
Server power removed
Server reset
2x CPU Xeon E5520 2.27Ghz
7 x HP SAS 300GB 6G DP Hot-Plug 10K
2 x HP 750 Watt PSU
6GB RAM DDR3
Smart Array P410i
At the moment it's nothing installed on the disks and no arrays configured.
ILO, ROM and controller at latest FW.
Tried
-disabling ASR
-setting power management to maximum
-removing memory sticks, one by one
-both PSUs separately
-without any disks
Have also tried clearing CMOS/NVRAM using system system maintenance switch. When I do this and start it up again, it stays alive longer (up to 2 hours perhaps). Otherwise, the reboots happen between 10 seconds to 10 minutes.
I have read some old threads on this and there seems to be 2 solutions. Either replacement of the motherboard (but I have no warranty left) or this: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01955503
The latter seems promising, but then I saw that I had 451277-002, which HP states are "NOT affected by this issue".
I'm pretty desperate here now. With the server like this and with no warranty, I might as well use it as paperweight.
Is there anything else I could try?
Is it worth trying to apply System Programmable Logic Device-update anyway? If so, how can it be done? Do I need to edit a bootable ISO and put the file into it?