On of our customers had a drive failure and the failed drive was replaced but the array doesn't seem to be rebuilding. It has this status for a couple of weeks and although we are taking backups they can't afford any unexpected downtime. I've checked and re-checked the ADU report and can't figure out why the rebuilding doesn't take place unless this is happening because the server is not idle although this is quite weird as we replaced other drives and it never happend. I've also noticed HP sent us a different drive model compared to the ones already existent. Hardware is a DL380 G8, controller B320i enbedded and 1xraid1 + 1xraid5 arrays, the raid5 array is the problematic one. Any suggestions would be highly appreciated. Please check ADU report and see if you can conclude anything else than me.
↧