Hello ,
We have the following Problem on an HP DL380 Gen9 Server .
Operatingsystem is W2016 Server 64bit .
Inserted are 2 x H221 , 2x H241 Cards on which is an Netapp E-Series Storage and 4 x LTO7 Tape Drives in an MSL 4048 connected.
2x H221 - Netapp Storage
2x H241 - LTO 7 Tape Drives .
All Engery Save Settings are turned to off . The Server is set in BIOS to maximum Performance Mode.
All Drivers and Firmware are Up to Date . Service Pack iso 06-2018 is allready installed .
When we restart the Server then first the "Rebooting" from W2016 Server is shown for 10 minutes , after this the Bluescreen appears with : DRIVER POWER STATE FAILURE
In the ILO Management Log there are this entrys :
PCI Bus 07/19/2018 07:41 Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 28, Function 4, Error status 0x00000000)
PCI Bus 07/19/2018 07:41 Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 0, Function 0, Error status 0x00000000)
System Error 07/19/2018 07:41 Unrecoverable System Error (NMI) has occurred. System Firmware will log additional details in a separate IML entry if possible
PCI Bus 07/19/2018 07:41 PCI Bus Error (Slot 0, Bus 0, Device 0, Function 0)
The Mainboard is changed from the HP Technical Support for the second time.
Hope someone can help me .
Thanks
Michael