Hello,
I recently bought a proliant ML350p gen8 without video card. I would like to use it as a workstation.
It works very wall, all 4 fans are working at 6% (reported by ILO interface).
Then I bought the recommended video card HP Nvidia Quadro 4000 and insert it into PCI Slot 6 and connect the extra power connector. When I power on the server, everything is ok except than fan 1 and 2 throw up to 36%.
I already read all posts about the fan noise issue in ml350 Gen8 with unknown card in PCI slot (HP said that it's coded "by design"). But the card is recognized by the bios and recommended by HP in QuickSpecs.
If I remove the card, the server come back at 6% for all fans.
Unfortunatly the warranty is expired..
Of course, firmwares are up to date (through last SPP) and also the nvidia driver.
Any help will be appreciated.
Regards,
JC