I recently rebooted my DL360p Gen8 Server to finish windows updates and received a Server Agent email stating the following:
The system has detected the following event:
SNMP Trap: 9005
Date time: 07/09/2019 02:05:48 PM
Computer: vvrc-server.valleyview.local
Source: Server Agents
Type: Error
Category: (4)
Description:
A 'Remote Insight Board Self Test Error' trap signifies that the Compaq Remote Insight Board is reporting a self test error.
Details:
Self Test Errors -2147479552
When I did some checking I came across this in the iLO4 log:
127
07/09/2019 14:00:00
Server reset.
128
07/09/2019 14:00:00
Server power restored.
129
07/09/2019 14:02:00
Embedded Flash/SD-CARD: Error reading media 0, physical block 66316: Timeout.
130
07/09/2019 14:03:00
Embedded Flash/SD-CARD: Error reading media 0, physical block 1234072: SMSC USX2065 unexpected com
131
07/09/2019 14:03:00
Embedded Flash/SD-CARD: Error writing media 0, physical block 1824560: Stack Exception.
132
07/09/2019 14:06:00
iLO reset by watchdog.
133
07/09/2019 14:06:00
iLO network link down.
134
07/09/2019 14:11:00
On-board clock set; was 07/09/2019 14:06:16.
135
07/09/2019 14:11:00
Embedded Flash/SD-CARD: Error reading media 0, physical block 0: Timeout.
136
07/09/2019 14:12:00
Embedded Flash/SD-CARD: Error reading media 0, physical block 2: SMSC USX2065 unexpected command (
137
07/09/2019 14:12:00
Rest API Warning: Rest API memory cleared (__ilo_schema_storeage).
138
07/09/2019 14:13:00
Embedded Flash/SD-CARD: Error writing media 0, physical block 98576: SMSC USX2065 unexpected comma
139
07/09/2019 14:14:00
Embedded Flash/SD-CARD: The AHS file system mount failed with (No such device) .
140
07/12/2019 09:51:00
XML login: System Administrator - 127.0.0.1(localhost).
141
07/12/2019 09:51:00
XML logout: System Administrator - 127.0.0.1(localhost).
From some research I did this error may be due to a bad NAND flash device or may require an iLO4 firmware upgrade, or have the system board replaced.
I do not utilize the iLO feature and do not have a network cable even plugged into the port. My question is do I need to worry about this error if I'm not uising iLO? Could this error/issue keep the Server from booting to Windows if not resolved? It did reboot fine this most recent time with this error. Thanks for any assistance/insight!