HP ML110 G7 with Hyper-V
Hi, Can we use HP Proliant ML110 G7 with Windows server 2012 Hyper-V host, 1 Active directory VM, 1 Backup Exec 2012 VM, for a small environment with 20 users? Thank you P.S. This thread has been...
View ArticleClik here to view.
Can not update IO accelerator driver?
Hi experts, I download HP_IO_Accelerator_3.2.2.869_x64_Win7_2008_2012.exe and update a new device <Mass Storage Controller> in C:\Program Files\HP IO Accelerator\3.2.2.869\Driver but I always...
View ArticleDL120 G7 and SmartArray P400
Hello, I have an unused SA P400 with BBWC that I would like to use with DL120 G7 server (with 4 LFF drives). However, the cable that came with DL120 use a different connector from P400. Is there a...
View ArticleML310e Gen8 not booting from USB Key with ESXi installed
Hi,I am trying to get my new ML310e Gen8 booting from a USB which has VMware ESXi installed on it.The system booted OK from the CD and found the USB key to install ESXi on, but will not boot from it...
View ArticleiLO3 1.60 availability?
Hello, A recent security bulletin provided several links to a new iLO3 firmware version (1.60) but none of the download links seem to work. Has this update been retracted, or is there another reason...
View ArticleProblem! Server ML350e gen8 08-HD Max sensor failed!
New server. Installed on the server windows SBS2011 essentials. 2 HDD in raid 1. There is not any PCI or PCIE cards. FAN speed 100%. TURBO Noise.Is responsible for what this sensor? where it is...
View ArticleSharing Disks Between Two Servers?
I was looking to basically cluster two DL360 G5 servers for the purposes of storage. Here is the scenario: Server A has 6 disk drives. Server B has 6 disk drives. I would allocate two drives from...
View ArticleInternal Health Red Light Issue - ML350 G5 Proliant Servers
Hi There! We are starting to see a number of our deployed ML350G5 Servers falling over with a red flashing light for internal health. Internally the red light is most often beside the PPM2 which is...
View ArticleUpgrading DL180 G6 Smart Array P410 firmware
Hello, I am looking to upgrade my systems Smart Array firmware ( P410 SAS )Going to the drivers HP website I get lots of options but I am hoping to confirm that by downloading the CD-ROM( DVD )...
View ArticleLost ML350 G6 Rack Conversion Kit Instructions
I have an ML350 G6 and have lost the instructions for the actual server conversion (taking the server apart, mounting the new faceplate, putting on the side rails) that came with the kit. I cannot...
View ArticleProliant DL 185 G5 SBS 2008 Raid 5 error - please help
Hi guys, please can somebody help me with my issue? I have HP ProLiant DL 185 G5 with SBS 2008 and RAID 5 - 4x250GB.There was one bad drive in bay 3, after forced rebuild of array I got error - Rebuild...
View ArticleVersion Control Repository is Busy
Frequently when I have made a couple minor software updates, the Version control agent on all servers stops reporting available software and there is a message that the VCRM is busy. This lasts several...
View ArticleSIM SW colum showing Green even if updates are available.
I am running into a situation where most servers show up green for SW in SIM eventhough there are updates available. Any suggestions are appreciated.
View Article2 Proliant DL385p Gen 8 Clustered with a Shared SAN HP P2000 10 GB
Hey Guys, I wanted to share with you the environment I have setup, to make sure if that is correct and/or what are your suggestions, since this is the first time I have setup a SAN environment....
View Articlehplog and temperature detection
Hi. I'm adding a temperature monitoring module to our system.Going through hplog man and over the web I couldn't find out what is hplog -t output when a high temperature is reached.Is the thermal...
View ArticleDL380 G4 very noisy at "normal" fan speed, latest PSP and FW, any solution?
We recently bought a used DL380 G4 with Dual 3.6Ghz, upon booting the system my initial impression is how loud the fans are. We installed a fresh copy of Windows 2003 R2 Enterprise, along with PSP and...
View ArticleDL380p Gen8 331FLR
We only use 2 of the Quad port 331FLR FlexLOM. Is there a possibility to disable the 2 not used NICs in the RBSU?I only see the option to disable the whole Quad port PCI device. We need this to get the...
View Articledl 165 g7 windows server 2012
Hi I have new dl 165 g7. I install windows server 2012 standard HP Rok version. In this paper dl 165 g7 is a tested server with ws 2012...
View ArticleSFF HDD Bay can install 9.5mm 2.5" HDD on it?
Hi all, I had bought two 2nd HP DL360 Series 2.5" SFF Server One is G5 and one is G6. Since the original HP brand SAS/SATA is too high price for me (I am private using for learning my MCSE Cloud, and...
View ArticleHP Manangement Software
I have a DL380 G5. The C partition blew and could not reboot. No one was near where the server was so they got a Windows and I was able to reinstall the OS remotely. The server booted fine and the RAID...
View Article