replacement P410 storage battery "not supported by the currently running...
On a customer's server, an proliant DL385 G6 with "smart array P410", we were alerted to a failing battery by the cciss_vol_status tool. They originally ordered (and installed) the wrong battery part,...
View ArticleMIBs required for "HP DL380P"
Hi, One of our customer purchaged "HP DL380P " to integrate that we required the following details. - MIB- Alarm Documentation- Alarm List- Features like...
View ArticleWindows 7 on DL380p Gen8
Hi, I am trying to install Windos 7 on a DL380p Gen8 system, but the installation fails.Probably it is missing neccesary installation drivers.I tried to install from within WinPE and DVD. When I start...
View ArticleEvent Notification with mail
Been out of the server configuration business for a while, and wanted to have the HP Event notifier sending me mails when something goes wrong, but all I can find is that there's a notification service...
View ArticleProLiant Server DL 365 G5
Hello everybody i am nik, please can anyone tell how can i flash the bios from the ProLiant DL 365 G5 ...??!! I'm trying to install the Windows Server 2012 on it but it doesn't work so Ithink...
View ArticleIlo Management Email Alert Not Work
Dear All, I download trial License for 60 Days for Ilo 4 for our server HP ML350p Gen8 PN: 652063-B21, everything working fine but email alert under management under Administration NOT Work, I put my...
View ArticleI Can replace HDD with INTEL 530 240gb SSD
I have HP ProLiant ML110 G6 Server with two 750gb hdd (raid) I can Replace both HDD with INTEL 530 240gb SSD ? Intel 530 series 240gb SSD sport with raid control ? SSD configuration as per below...
View ArticleSmart Array P812 installation in a DL380G6
We can physically fit the P812 into the DL380 G6 without any issues - into the x8 slot of the primary riser card, but the card isn't detected by the server. It doesn't appear in the BIOS scan and none...
View ArticleB110i smart array, Logical Drive 1 is queued for rebuilding.
One of four disks on HP DL180G6, Smart array B110i controler, RAID 10, is replaced by new one (larger capacity), due to hardware failure. System boot up (F1 pressed during boot), and MS Win Server 2008...
View ArticleProliant DL580 G7 New RAM issue
Hello all. I'm trying to upgrade the RAM in my Proliant DL580 G7 server. I'm replace the 4gb 10600 1.5v sticks with 16gb 10600 1.35v sticks (HP 632204-001). When I replace them, i get a long beep and...
View ArticleHP ML370 G5 power loss issue
Hi everyone,I've encountered a problem, our ML370 G5 server turns off periodically. We have already replaced the PSU, it not helps. :( After the server turns off, the PPM1 LED on the Systems Insight...
View ArticleNewbie needs help
I just inherited a HP PROLIANT DL380 G4 with dual zeons, tape drive, 4 146gb hdds and a Storageworks raid with 14 146gb hdds. I would like to get this up and running.1) The server boots and goes in to...
View Articlesystem management alerts on Proliant
I am looking for a simple and inexpensive way of having my Proliant servers send out an email when a hardware component fails. I cannot at this time get into setup of an expensive and complicated...
View ArticleHP Proliant DL180 G6 PCI-E Riser Card
Hey All, I was wondering what the exact part numbers are for my HP Proliant Dl180 G6 to change out the 2 LFF HDD's for a 3 PCI-E Full Height, and 1 PCI-E Half Height Cage and Card? Thanks,
View ArticleHp Proliant DL180 G6 not posting
I have 1 of my HP Proliant DL180 G6's that is not posting, and I have replaced the motherboard and the fans just keep running on high and never posting. I am not sure what else to check at this point?...
View ArticleHP ProLiant ML350 G4
I'm trying to boot from a USB flash drive. The only menus to get to is the Option ROM Configuration tool. I got to change the boot order for a USB Flash Key or something like that to the first and it...
View Articlehow do I low level format disk of a DL380 server
I have a DL380 HP server. I installed server 2008 and exchange on it and I would like to erase all data of the two physical disks. I have a option in the BIOS "Delete logical drive" . Can I use this...
View ArticleML330 G6 UPS
I have an ML330 G6 server with redundant 750W hot-plug power supplies. I would like some guidance on choosing a UPS correctly sized for this server and the two power supplies. The power draw seems to...
View ArticleHP Power Advisor/Power sizing for Proliant Servers
I am moving into a small room that I am converting into a server room. I am going to have a rack with five Proliant servers in it. Three DL360p G8's, a DL120 G7 and a ML350p G8. All of the servers...
View ArticleBattery Really Needed for SmartArray with Write-Caching Enabled?
I wanted to get some feedback on this, to be sure I'm not missing something. We have P400i SmartArrays in DL360 and DL380 servers, all of which have dual power supplies connected to redundant power...
View Article