raid5 p420io controller: logical disks have same unit serial number
Hello, I have a proliant ML350p gen8 with raid contoller p420i.4 physical disks in raid array that are seen as 3 logical disks. These are seen as scsi disk sda, sdb and sdc With Linux (opensuse 13.2)...
View ArticleNIC problem ProLiant BL460c G7
Hello,I am having problems with eht0 and eth1 in my server. I think the problem comes because NIC1 and NIC2 are disable, but I don't know how can I enable them.You can see a screenshoot attached.Can...
View ArticleiLO 4 AD authentication issue
I'm running DL360 Gen 8 servers with iLO4 and iLO firmware 2.10 I'm attempting to set up the iLO to authenticate with Active Directory. I've installed certficates on the AD and have tried both 1024...
View ArticleWarranty on Proliant hard drives
I have a hard drive that has failed that was part of a RAID1 array on a ProLiant DL360 G7. I have extracted the serial number (remotely) via ProLiant DL360 G7, however upon trying to check if the...
View ArticleAdvice on Installing Drivers from HP SPP onto W2K12 R2
I'm having very uneven results with the HP SPP. I downloaded it, and located the file that installs the Smart Storage Administrator (that replaces the HP Array Configuration Utility). It works well....
View ArticleHP server management
Hi, We have an HP ML310e G8 server that we need to have the management software installed on for our RMM agents to communicate with. Our RMM company suggested the SIM. Looking at another HP server we...
View ArticleHP DL180seG6 CTO Server BIOS upgrade problem
I get a used server.Product: HP DL180seG6 CTO ServerProduct number: 510300-B21 current bios version is O33 10/20/2012ROM ID: 18DIM244 I search from drivers secion of hp, only HP ProLiant DL180 G6 -...
View ArticleSPP on Gen 9 Servers?
Hi,As Gen9 Servers have the option to update the firmware in the BIOS/UEFI, does that mean that the HP SPP is no longer required? thanks
View ArticleML350 G9 UEFI Won't boot to 2012R2 CD or USB
Hello, This is my firts installation of a G9 serie. I would like to boot in UEFI mode with a generic 2012 R2 iso. I use Win DVD Usb Tool to create a USB drive. First try = no boot. So I test my USB...
View ArticleDL 380 G9 High fan speed
We just purchased 7 G9's and installed windows 2012. However one of them after about 20 minutes, the fans kick in really loud and just roar. They do not stop. a restart will fix it, but that's not the...
View ArticleGen9 Drivers in Onview for system center
Hi. We are trying out OS deployment with SCCM for our Gen9 servers. We downloaded the hp oneview for system center 7.5 and installed the HP ProLiant SCCM 2012 Integration Kit manully as the manual...
View ArticleHP DL180se G6 CTO Server BIOS upgrade problem
I get one used server.Product: HP DL180seG6 CTO ServerProduct number: 510300-B21 current bios version is O33 10/20/2012ROM ID: 18DIM244 I search from drivers secion of hp, only HP ProLiant DL180 G6 -...
View Article[Proliant DL380p] [Centos7.1x64] Server hangs while rebooting
Hi, I made a new oVirt installation (http://www.ovirt.org/Home) using Centos7.1x64 (all updates) on top of two HP Proliant DL380p. When I reboot any server, it hangs with this message "hpwdt unexpected...
View ArticleML110 G6 - hardware reserved memory
Hi there, I'm encountering a problem with the ML 110 G6 server. We're running windows server 2008 R2 and windows shows that 8 GB (of total 16 GB) are hardware reserved and not accessible. The BIOS...
View ArticleML350 G6 led lights on front panel
I thought the storms last month were causing power outages and my UPS was not telling server to reboot. Last night it did it again but no storms. It was just in sleep mode. Turned it on then did...
View ArticleHP DL380 G7 - Boot Error
Hello Together, perhaps you can help me with a error from a HP Proliant DL380 G7 server!If i start the system, it tooks 2 or 3 seconds and the server shutdown and boot again....
View ArticleHDD transfer speed
Hello,I installed 4 Hitachi (HDT725025VLA380) SATA drives into my ML310e Gen8 v.2 server (724977-S01).It has Smart Array B120i RAID controller. Though these drives are SATA-2, the controller says...
View ArticleUnable to configure RAID for H220 SAS 2 Controller in a HP Proliant ML310e G8v2
I am setting a brand new HP Proliant ML310e G8v2 server with an additional HP H220 SAS 2 PCI Controller that has 4 HP 450Gb 6G (652615-B21) 6G SAS 15K rpm LFF hard drives. The BIOS is configured for...
View ArticleCan't configure RAID on ML10 v2 (B120i controller)
Hi all, I can't find where I can configure a RAID array in a new just-delivered Proliant ML10 v2. The F5 key doesn't work. It says so in the documentation too, but does not explain how one can go into...
View ArticleHP Insight Foundation Agents Not Running -- Even though SNMP is up.
Curiously, when I ran hpsum.bat to install the HP utilities, cp023853 was marked with a little red dot. I know I can't complete the installation if any driver has a red dot next to it, but other...
View Article