Accessing ILO from the internet without having to pay for
Hello,is there any way to access ILO from outside the local network from the internet without having to buy the expensive HP remote access licenses? Our server is ML350p with ILO4thanks in advance!Joe...
View ArticleArray Controller P410i issue
Hi there,i'm getting below array controller p410i error (cmd=0h, err=00h, dlu-013:4h) with the 512 BBWC cacheon a Proliant DL360 G7, upgrading p410i firmware to 6.0B didnt help, note the error...
View ArticleUSB over ILO2 as Floppy
I have ProLiant DL380 G5 with ILO2 fw. 2.15. OS is W2008 x64 If I connect USB flashdrive as virtual media in OS i see only Floppy drive A: I want connect USB and in system use USB too. Is possible...
View ArticleNew HDD for a ML 330G6. Which is the right one?
Hi, One of my customers owns a ML 330G6 with 2x 250Gb HDD SATA. One of the HDD failed but is no longer in warranty, so we have to sell a new one. The spare number of the HDD is 459318-001 but my...
View ArticleFaulty Disk Drive
Hi,I've got a Dl 160 Proliant G5 and I can see on the fron that there is a disk drive failure as it has a red light. It's running Windows 2008 R2, but when I look on the drivers to download I can't...
View ArticleHP G5, Red Blinking light? Help
I've got a G5, the second light from the top is blinking red. Powered on, but no network connectivity. Can someone assist in troubleshooting?
View ArticleFirmware update dvd for older server?
I have download firmware-10.10-0 firmware dvd and booted from it for my DL 140 G3 server and after some time I saw no update is needed. Does this mean there is no update or firmware dvd does not...
View ArticleHP ProLiant Lights-Out 100 Remote Management software
Hi I have HP ProLiant DL145 G3 Server with WIN2003 Server and I'm looking for HP ProLiant Lights-Out 100 Remote Management software.Can someone pls post a download link?
View ArticleOpenvox A800E and server HP ML310e Gen8
There is a HP ML310e Gen8 server as the Asterisk server under control of CentOS 6.4. On the server BIOS and other firmware to the last versions is updated.There is an Openvox A800E card inserted into...
View ArticleProliant ML310e Gen8 making a LOT of noise!
I recently purchased a Proliant ML310e Gen8 to replace a dying Proliant ML110G5. Several reviews of the server commented on how quiet it was, which is a plus for me as the server sits with me in the...
View ArticleP410 265MB+BBU poor write performance
Hi Guys, my setup is as follows:- HP ProLiant SE316M1 (=DL160 G6)- 32 GB Ram- P410 265MB+BBU (definetely enabled)- 4x 1TB WD VelociRaptor (WDC WD1000DHTZ-0)- Raid 1+0- Windows Server 2012 Standard...
View ArticleDL 180 G6 BMC firmware fault after HP Support pack online upgrade
Tomorrow I have installed HP support pack on my DL 180 G6.HPSUM used with online repository, all packages was installed.During installation all fans starts working at full power, after reboot fans...
View ArticleDL380 G7 Backplane half flashing blue after FW update
We are in the early stages of re installing a DL380 G7 that is being moved into a new role within a client organisation. After migrating all data from the server we decided that installing the latest...
View ArticleDL380p G8 opensuse 12.3 problem!!!
I m trying to install Opensuse 12.3. After a red screen solved qith firmware upgrade, nowthe install stars without problems but then it become black screen and no output.I tryied EDD=no, noacipi... but...
View ArticleScripted offline hp sum firmware updates
Hello, I'm trying to set up an automated firmware deployment. The goal is to deploy firmware from a network share to easily add hotfixes etc. and to have logs and inventories for the single servers. I...
View ArticleALL Hard Drive swaping from DL 380 G3 to DL 380 G4
Hello, I have a question regaring the swapping of hard drives from DL 380 G3 to GL 380 G4.Would it be possible to pull out all the disk from G3 and put it on G4?The raid configurations are the same,...
View ArticleHP DL380 G7 - IO Accelerator Card(s) Issue
I have a customer that has several DL 380 G7's that are having issues with running fio-attach and fio-detach. They have replaced over 7 cards in the last few weeks and I am not convinced the cards are...
View ArticleAdding RAM to DL380 G7
My client has a DL380 G7 single CPU server with six 2Gb RAM modules (three banks of two each.) The current 12Gb of RAM is not sufficient and I need to upgrade to 32Gb. Can anyone tell me the best...
View Articleunexpected Restart or nightly shutdown with blue screen
my server is (HP Proliant ml370 g5) with windows 2003 server Sp1 Operating system installed...it was stable until 2 weeks ago.The problem is: when the computer is running normally it makes unexpected...
View Articleconrep: enabling pci devices
I have load of servers where i need to enable their internal disk controllors.Conrep is not wel documented to get that part working.Any one with an idea ? <Section...
View Article