Cannot POST, rebooting at 10% during CPU initialization, Code 0168 and/or 4048
Hi Everyone,I have a <1 year old ML310e Gen8 v2 server and it recently decided fail to POST after I tried to reboot the server. It turns on for ~5 seconds, where I can see it's still only at 10% of...
View ArticleDL380 G7 P410i Disk Reads Slow
Hi,I am just setting up some DL360 G7 servers with the P410i 1GB and 8 x 146GB 15K drives. The disks are being configured as a single Raid 10 unit and I am installing Centos 7 on these. One of the...
View ArticleClik here to view.
se326m1 hardware modding
Hi, I bought a SE326M1 server (very similar to DL180 G6) which I plan to use for homelab desktop virtualization.CPU and RAM didn't arrive yet, so I didn't turn it on yet but I have a few hardware...
View ArticleClik here to view.
What does this mean? - RESTful error during POST on a ProLiant DL380 Gen9
I'm getting the following error after a restart on my ProLiant DL380 Gen9:Health Status: Configuration Required- 335-HP RESTful API Error - RESTful API PUT request failed (HTTP Status Code = 405).BIOS...
View ArticleML310 G5p PCIe version/generation?
The spec sheet claims the ML310 G5p (and G5?) are "PCI-Express 3.0 Compliant" on page 4, section "Industry Standard Compliance".But the Intel 3210 Chipset only claims to support PCIe 1.1 .What...
View Article2012 R2 on a Proliant ML310 G5
Hello,I can't find a link where I can check the compatibility with Windows Server 2012 R2 for an HP ML310 G5 server.Is there someone that have installed WS 2012 R2 on this server?Any link where I can...
View Articlehprest.exe type HPBios not available
I am using hprest.exe to set different Bios settings like ServerAssetTag which are located at the type HpBios.1.2.0Now i have a problem with one ProLiant ML350 Gen9 out of 10, where hprest says that...
View ArticleSNMP returning degraded disk controller degraded
We use PRTG to monitor the health of a number of ProLiant Servers via SNMP.One is an ML350 G6 running Server 2008 R2. Before Christmas, PRTG started to warn that the disk controller on this server was...
View ArticleDisabling the Dynamic Smart Array on a Gen8 from the RBSU CLI
I'm trying to find out how to disable the Dynamic Smart Array on my Gen8 Microserver so that the boot firmware just treats it as a normal SATA interface.I can disable it from the GUI version of the...
View ArticleDL380p Gen8 Memory Configured
Hi All,Just want to see if anyone ever experience the issue we are facing.HP DL380p Gen8, Dual CPU, 256GB RAMBoot Post screen show 224GB Installed.Rom Utility and HP Diagnostic Utlity shows 256GB...
View ArticleML110 G9: How noisy?
Hello, I would like to know how noisy would be a ML110 G9 with a E5-1650 v3 and 6 LFF drives?This server may stand inside an openspace and the noise should be equivalent to clim ventilation and office...
View ArticleDL380 Included warranty vs 3yr NBD Care Pack
Hi,My supplier has quoted a 3yr NBD care pack with a DL380. Looking at various documentation online, the DL380 comes as standard with a "3/3/3" warranty with NBD support as standard.I asked my supplier...
View ArticleEnabling P440ar cache on HP DL380 G9 problem!
HiI have a HP DL380 G9 server with a P440ar Raid Controller.Im using five Samsung Pro 850 as RAID 5.The benchmark of the disks by Crystal Disk or other benchmark softwares, show that speed of...
View ArticleP410i controller - vmware esxi lost connectivity
Hello, I have an HP Proliant ML350 G6 with P410i controller. It's running VMware ESXi 5.5 U2. I'm having performance issues and I see an error many times a day in the esxi logs. I found some other...
View ArticleProliant DL160 G8 Move from SFF to LFF
Is it possible? Can someone point me to documentation on how to do it?
View ArticleDL380e G8 replace B320i controller with new Smart Array
Hello guys,I've a server HP Proliant DL380e G8 with B320i controller attach it three disk SAS, on it is installed windows server 2012. I would like to buy new Smart Array P420 1GB FBWC (code...
View ArticleDL360 G7 PCIe riser SSD Xenserver boot
Greetings,We have just aquired a DL360 G7 with intention of installing Xenserver on it and after installing PCIe to Sata adapter on the PCI riser with Samsung SSD the device does not seem to be...
View ArticleHelp Intelligent provisioning on DL60-GEN9
Hello everyone. I was installing a windows 2012 Server R2 in a server DL60-GEN9 and everything was fine until the firmware made an update and it went wrong. Now it doesnt start the Intelligent...
View ArticleHPRest.exe Administrative permissions / Powershell BIOS Cmdlets based on...
Hello,is there any particular reason why hprest.exe needs to be "Run as Administrator" on Windows? Communication with remote systems via HTTP/HTTPS should normaly not require administrative...
View Article