HP ProLiant Gen8 / Gen9 Active Health System Viewer
Hi all, i need a Tool, named HP Active Health System Viewer, i need a offline Version !!So i can capture the AHS Log from Gen8 or Gen9 Servers, save to USB, and open the Logs with the Viewer on my...
View ArticleNeed help with drive firmware update
Hi. I have a few DL380 G5s I bought from eBay. A few days ago, one of the drives died. I ordered new ones and popped one in last night. I was thinking today "is it done rebuilding the array?" so I...
View ArticlePROLAINT Dl380 on a Raid , Issue 4 drive on a raid with 5i Controller all...
Dl380 on a Raid , Issue 4 drive on a raid with 5i Controller all went down at one time THEY ARE ALL LITE RED ON THE DRIVE THE OS IS ON 2 MIRROR DRIVE WORK FINE- i DONT THINK ALL THE DRIVE WENT AT...
View ArticleML115 G5 and 8TB Hard Drives
Hi All,Hopefully someone has tried this... Or has suggestionsI am looking to re-use my ML115 G5 with four 6 or 8 TB drives for a decent sized array (WD Greens (been using 750Gb so know they're ok))....
View ArticlePlease tell me correct cable. I purscahed wrong one.
I have DL180 G6 with 4 drive hot swap model. On mother board there are 6 sata connector and on hot swap panel there is mini sas connect.I do not need any raid configuration. What is the correct cable I...
View ArticleCreate 3rd array (RAID1) with Smart Array P420i on DL380p Gen8
Hello all, We have a DL380p Gen8 server with Smart Array P420i controller. Till now we had 2 arrays with RAID1. Recently we installed 2 additional disks, which were recognized immediately in Smart...
View ArticleProliant 380 G6 replace 3.5 -> 2.5 HDD
Good afternoon.There is an HP Proliant 380 G6, s/n: CZ201020JK.It was established 6x3.5 HDD. I want to put the cart 8x2.5 HDD (496074-001 ). What to do this, and if at all possible? Where can I find...
View ArticleML350 G6 will not boot with 2 X5670 CPUs
Hi, I'm really hoping someone can help with this as it is driving me crazy.I have an ML350 G6 with 1 CPU (X5670, SLVB7) and 9 x 8GB Registered DIMMs (72GB). The server powers up and works perfectly....
View ArticleHardware Diagnostics
Hello all, I am currently on the hunt for a bootable dvd that can perform hardware diagnostics from HP. I am not sure if this exists or not so I figured I would ask. I have several ProLiant DL380...
View ArticleUnable to install 2012 R2 on new server (Bluescreen)
We have just taken 3 DL360's GEN9's with 120GB SATA SSD'sWe are trying to provsion them with 2012R2 Core Datacentre.But were failing badly.We get a dpc_watchdog_violation bluescreen.So we have used the...
View ArticleSUSE SLES 12 boot failed on Proliant ML10 v2
Hello, I try to install SLES 12 on the above server. It looks like the installation is successful. But when reboot the server, I can not go in the SUSE but get the following message: Booting from local...
View ArticleML350 G6 PCIe + fanspeed + bios
I have a ML350 G6 server and it appears that the server increases the fanspeed when i put any device inside a PCIe slot. Since i run this server as a home/office server this is highly...
View ArticleDL585 G6 No HDD LEDs
Hi Guys,Really hoping you can help me out here as I'm at my wits end with this. I've been in posession of a DL585 G6 since December 2014 and since I have had it the HDD LEDs have never worked, except...
View ArticleILO Firmware Update concerns -- DL360 G5 ilo 2 version 1.43 to the latest...
Hello,I have a few OLD DL360 G5 servers, currently running on a ILO 2 Version 1.43 firmware. I need to update it to the lastest supported verison 2..25 (due to ESOL) or 2.29 if possible. i have tried...
View ArticleHard Drive Tray
What are some things you like/dislike about the newest Hard Drive trays (Part No. 651687-001)? Below are some points of discussion to think about:Physical appearance of the trayOverall...
View ArticleCan't team Nic on server 2012
Hello everyone hope everyone's greatI have an hp proliant ml310e gen8 I'm having an issue teaming the 2 Nic interfaces togetherI tried 3drivers the1.Microsoft driver the default with windows server...
View Articlehelp needed with HP ProLiant ML350 G6
help needed with HP ProLiant ML350 G6hello.i humbly turn towards you as i need help with already quite old server.first ill tell you a little story about my situation. me and my family bought a house...
View ArticleML 350 G5 with 2 PSU - suitable UPS ?
Hello, This is my first post so please forgive if I make any mistake. I’d like to apply UPS solution to company server that was last time change to HP ML350 G5 (2 x L5420, 2 x 300GB, 2 x 146GB) with 2...
View ArticleDL380G9 shutdown error = NMI: Channel Check / IOCHK
Product Name: : HP PROLIANT DL380 G9 SERVEROperating System: Microsoft Windows Server 2008 R2 SP1 Dear all,Each time i "Shutdown" from windows session , after the shutdown message, a front face LED...
View Article