HP Intelligent Provisioning update error on Proliant ML110 G9
Hi everybody!I have a brand new Proliant ML110 G9, and before installing the OS I want to update all internal firmware and software, everthing went fine so far, the only one giving problems is HP...
View ArticleProLiant DL380 G3 freezes after cpu detection !?
Hi, I have a DL380 G3 Server. It worked very well until today. I think it freezes just befor scsi hard drives detection... It freezes after cpu's detection, in here: http://screencast.com/t/WDF8f4ml...
View ArticleOEM Windows activation on DL380 following motherboard replacement - no SLIC
Hi,I'm wondering if anyone can shed any light on this as it's an issue I've received conflicting information.We have a server which was purchased with an OEM licence of WS2008. As a result, the OS...
View ArticleServer
Si è guastato un disco su server HP Proliant ML330 G6 con il controller raid B110IAlla sostituzione il raid segnala che sarà fatto il rebuild ma la macchina continua a riavviarsi cercando di riavviare...
View ArticleHigh rate failure of 1.2TB HD on HP DL380p Gen8 with fully populated (25)...
High rate failure of 1.2TB HD on HP DL380p Gen8 with fully populated (25) hard drives.OptionsEdit MessageMark as NewBookmarkSubscribeSubscribe to RSS FeedHighlightPrintReport Inappropriate...
View ArticleDL80 Gen9 Graphic Card
HIAbout Server DL80 Gen9Can I insert / install graphic card different from those mentioned in QuickSpec?http://www8.hp.com/h20195/v2/getpdf.aspx/c04447832.pdf?ver=1.0for exapmle these low...
View ArticleUnable to set Powerprofile with Powershell
HiDownloaded and installed the HPBIOSCmdlets.Can successfully use the Get- commands and talk to bios. But if i try to Set a for example new power profile it shows an error: Get-HPBIOSPowerProfile...
View ArticleDiscreet GPU in ML350 Gen9
Hi GuysWould it be possible to install a non-HP branded GPU in a ML350 G9 server? I talking a card with a GPU chip that is the same as one of the HP branded ones but from a different manufacturer (yes,...
View ArticleStorage Expansion bay for HP DL360G7
Hi all,Did anyone know if expansion bay for HP DL360 G7 still exist ?Thanks all
View ArticleDL380 G5 Not network connexion
Hi,I have a DL380 G5 server with Windows 2003After a reboot the server started well though the network is not working.Everything seems normal on the server, network cards blink network services are...
View ArticlePower supplies going offline on new HP ProLiant DL360 Gen9
Hello,I'm having an issue with a server where the power supplies seem to go "offline", but not at the same time. I noticed this just a week or so after getting the server (August 2015).iLo reports a...
View ArticleHard Drive Caddy / Tray for ML110 Gen9?
Hi,our new ML110 Gen9 server does not include the hard drive caddy / tray as with the ML310 Gen8.My question is if the Gen8 caddy / tray work for the Gen9 cage? This are LFF (3.5") NHP (Non Hot...
View Article3T HDD Lost on MicroServer Gen8 with AHCI enabled
Hi Experts,I have a MicroServer Gen8 which installed Windows Server 2008 R2 with AHCI enabled.After the OS installed successfully, i inserted the new 3T HDD to the slot, and the system can recognize...
View ArticleIgnore FC/NIC link down status via CLI
I have over 100 ProLiant Gen8/Gen9 servers with FlexFabric NICs set to FCoE personality mode. Many of the servers don’t have LUNs assigned to the FCoE adapter and they are not zoned on my FCoE...
View ArticleeSATA PCI-X card installation on HP DL 360 G7 ?
Hi All,I've just bought 2 eSATA 2 SATA RAID PCI PCI-E Express Card Sil3132 from: http://www.ebay.com.au/itm/PCI-e-PCI-express-to-eSATA-SATA-RAID-Sil3132-3132-controller-Card-Adapter-/221256450796and...
View ArticleP420i controller maximum arrays (RAID1)
Hello all, We have a DL380p Gen8 server with P420i controller.Does anyone know the maximum number of arrays (RAID1) supported by the controller?Thanks..
View ArticleDL360 G5/G6 iLO2 with firmware v2.25 support IPMP V2.0 SOL? Get Auth...
Hello, First of all, thanks for your help/advice.I have several DL360 G5 and G6, iLO2 with latest supported firmware version 2.25. I want to use IPMI tool, in particularly the SOL (Serial Over Lan)...
View ArticleDL380 Gen 9 processor serial number
I'm trying to fill in a form for the free cashback offer that HPE are running. On the form it says 'Serial number' next to the processor kit I ordered (which was installed by the reseller). Luckily I...
View ArticleOffline Firmware and Gen 8+ Systems Running Windows
Guys, just wondering if offline firmware is required anymore on Windows systems running on Gen8 or higher hardware? In the past, we generally would have been able to run some component firmwares online...
View Articlebad drive replacement hot swap
Question on drive swap Proliant ML350p Gen8I have a bad drive on this server but my concern is when I look at the array diagnostic report it shows 2 logical drives in interim recovery mode but only 1...
View Article