HP Proliant DL380 G7 won'tr post after memory upgrade
I have a Proliant DL380 G7 that intially had 1 x Xeon X5670 CPU and 36 GB RAM. Life was good and the server ran solid and happy.I decided to upgrade the box to 2 x Xeon X5670 and 48GB RAM. I bought...
View ArticleProliant dl120 g6 can't start after update BMC
Hi,I have problem with my server HP Proliant DL120 G6. First I update BIOS to latest version (O26 (07/01/2013) and then I update BMC to latest version (4.26). After these updates during start server...
View ArticleFBWC battery on DL360 Gen9 Base Model
We plan to buy DL360 Gen9 Base Model (755262-B21) with preinstalled P440ar/2Gb.We need Write Caching to be available on server.Surfing datasheets it is not clear is this server has FBWC battery...
View ArticleDisplay flashing/blinking after POST.
Has anyone ever seen this before? Display keeps blinking after POST. DL60, only started happening after installed a P440 Raid cable to attach it to the SATA drives. Also installed a PSU enclosure...
View ArticleHP dl180 G6 ilo
HiHiI have a DL180 G6 Server. It has 2 NIC interfaces but no interface for ILO. can I config ilo for this server ? or can support ilo ?Thanksars
View ArticleDebian 7 32 bits in a HP G9 DL 180.
Hi, everyone.I'm trying to install Debian 7 32 bits in a HP G9 DL 180, but the boot dvd don't work.Is possible to install a Debian 32 bits in this G9 server ?BR
View ArticleSmart Array P410 in Slot 4 (physical drive predictive failure)
I am using the HP System Management to monitor my drives and other parts of my HP ProLiant DL 160 G6 Server.I have noted that in my physical drives (of 4 drives), the Port: 2I Box: 1 Bay: 2 drive is...
View Articlewhich Rackkit for DL385 G5p?
Found rack-kits 487244-001 for my G5p server.But are rack-kits for G5 (without "p") fitting, too? They are just about 20-30% of G5p's rack-kits.Are those rack-kits (487244-001 and hte G5 ones) limited...
View ArticleAn another case of array configuration utility software not showing controller
Hello!I have a new Proliant DL380 Gen9 and I'm trying to use the Array configuration utility software version 9.40.12, but no controller is display, even if I configured successfully 2 raid set on the...
View ArticleUpgrade B140i to P440/4GB, retain Array?
HelloI have an DL180gen9 with the integrated Smart Array b140i Software RAID Controller.I have 5 x 4TB SATA Disks in one big Array (RAID 5), with two Partitions (one with 100GB for the System, the rest...
View ArticleHow to create partitions (C and D drive ) using Intelligent Provisioning in...
I cannot able to create C and D drive partitions in HP G9 Server using HP Intelligent Provisioning during server first setup.Kindly guide me.
View ArticleHP DL380 G7 Server: How to active/install OS after removing 2 affected drives
Operating System: Microsoft Windows Server 2008 (64-bit)I have a Server System. HP DL280 G7.My two hard drives are not working. These are primary two. Remaining 3 hard drives are working.I void the...
View ArticleOffline Diagnostics for ML150 G6
"Hello,I have a ML150 G6 and it's acting a bit tweaky. I went online to get the offline diagnostic utility that I've used in the past, but can't find it anywhere. Someone on the forum mentioned that...
View ArticleP800 Additional external array appearing as identical, internal disks
Hello all,I have a DL380 G5 with a P800 RAID controller. I have a four-disk internal array that came with the server, and now a SAS array attached externally by the SFF8088 port, which is split to four...
View ArticleAdding 2nd P400 controller in ProLiant ML370 G5
As stated i have a ProLiant ML370 G5 that needed additional disk space, I had to purchase a second P400 controller and drive cage. After installing the parts and disks, I booted to the Array...
View ArticleHP Proliant ML350 G6 2 short beeps 3 times
I've got an HP Proliant ML350 G6. All green lights, nothing in iLO logs, IML, Diagnostics. Yet for some reason every so often (haven't timed it but at least 10 minutes in between I'd guess) I get 3...
View Article[HELP] Cannot Configure HP Storage DL360 Gen9
Hello,Trouble in my NEW SERVER HP DL360 GEN9. I'am try to configure server disc (HP SAS 300GB), but i can't see menu to configure that. License has been downloaded from myenterpriselicense.hpe.com, i...
View ArticleHP PROLIANT ML 350 GEN9 207-invalid Memory Configuration - Processor n, DIMM n
HelloFirst excuse my bad English as i'm FrenchWe are setting up a new server that will be dedicated to virtualisation.Our Config :-HP Proliant ML350 Gen9-Ram 12*16 go = 192 go (same spec for each...
View ArticleBIOS versus UEFI: are you using 1982 software?
This is more in the Linux vein, but could apply to Windows I would think. This is not an ongoing problem as we are returning these Gen8 servers for Gen9, so this is more of a rant and hopefully a...
View ArticleBIOS ML350 G6
Hello i have bought a used HP ML350 SERVER G6 and im now running bios D22, but i need to upgrade the bios, can someone send me a bios file for this server? Im upgrading to x5650 dual setup and im not...
View Article