No SD card HP DL385p Gen 8 iLo2.4 HPSUM 2016.04
Hi,Please can you enlighten me as to why I can not see the SD CARD when trying to install ESXi 6.0U2 or in the iLo web page for thet matter?I have tried different settings in the BIOS and still cant...
View ArticleP410i array won't rebuild.
I have an ML350 G6 with a P410I controller. It has the backup battery installed.It has 8 ports and 2 arrays configured on 7 disksRAID5 SAS ARRAY A disk 1:1, 1:2, 1:3, 1:4, 1:5 - disk 1:4 failed. RAID1...
View Articlehp ml150 g3 graphics card
im looking for a graphics card for my hp ml150 g3 server i just bought 2 sets of 8gig rams so i need a ram graphics because the 2mb cant do anythng really
View ArticleDL360 G7 not working
I am having issues. I have almost replaced all the parts on a DL360 Gen7 unit (MB, Control, CPU, RAM) and still getting a red light on the front and the SID most of the lights are orange. Any...
View ArticleExtract firmware from all servers
My manager wishes to create a database of all current firmware levels on all our DL/BL G3/4/5/6/7/8 servers (200+).We know that some of our HP servers are running on out-of-date firmware but is there a...
View ArticleBL c460 gen9 Centos 7 qlogic n2x error
Hello Sir/MadamWe are based on centos 7 development openstack. and we running the Daas (VDI) based on RDP agreement ，but it is also error. the attachment is the crash file. pls help me , thank you very...
View ArticleUnresponsive DL360 G7, Health LED Blinking Red, 1 redundant Fan degraded, all...
Hi, i am new here and i hope someone can help me. I recently toke over a role and handled this server dl360 g7. It has 2 power supply all are ok. 1 degraded fan and others are all green. Installed with...
View ArticleHP Proliant DL160 G6 Temperatures
Hi,I recently purchased a proliant dl160 g6 and upgraded the cpus to 2 x Xeon X5570 95W.I was wondering what the normal temperatures were for the cpus under full load (turbo boost active and 130W fan...
View ArticleRAID 6 (ADG) vs. RAID 50 (NPG: 2) performance ?
Hi people,Between [b]RAID 50 (NPG: 2)[/b] vs. [b]RAID 6 (ADG)[/b]. Which one is performing better write performance for large backup server repository ?Here's the current backup server deployment:HP DL...
View ArticleMl350 Gen9 vmware 6.0 disk is very slow
Good morning, the performace of Ml350 Gen with p440ar under vsphere 6.0 is very slow. I have a raid 10 with 4 sas 600gb 10k, in a normal scenario i can not reach 15kbps/s with 2 virtual machine with...
View ArticleVMware vSphere 5.1 U1: update/upgrade Best Practices
Hi all,I inherited a single host HP ProLiant DL380e G8 with installed an HP Custom Image of VMware vSphere 5.1 Update 1 (no Shared Storage, no VMware Virtual Center, no VMware Update Manager): the...
View ArticleLogical drive fails in RAID 1 array when physical drive fails or is removed
HiI'm having a problem with server which has its C: drive on a RAID 1 array controlled by a Smart Array 410 controller. It started with the server suddenly dying and couldn't start up again due to "No...
View ArticleHP DL380 G7 - HDD and RAID Problem
I have problem with server, 2 HDD was failed same time, where 3 HDD was configured Raid 5. I replaced 2 HDD and got following message through array controller, "Drive array resuming automatic data...
View ArticleCan DL380 Gen9 Serial/COM Port uses for RS485?
May I know the COM port can be used to communicate with RS485 device?
View Articlememory error code on dl160 g6
hi,I got this error when installing memory. 113-memory initialization error detected at proc02/dimm9c. After reseat dimms, system came back to normal, but after one reboot, this error returned.Any idea...
View ArticleDL180SE server and Easy start CD
looking for a DL180SE server Easy start CD - I choose the server and OS version under software and its not an option. A few have said to use the proliant packs or smart start cds, but I didnt read...
View ArticleHP KVM - Can "HP Server Console Switch G2 0x2x16 - AF618A" support remote...
Hello,I wanted to check if the below HP KVM supports accessing the server remotely,HP Server Console Switch G2 0x2x16 -...
View ArticleiLO Powershell Cmdlets - How to add directory groups?
I have successfully set the iLO controllers to use LDAP usingSet-HPiLODirectory -Server $_ -Username $iloUsername -Password $iloPassword -LDAPDirectoryAuthentication Use_Directory_Default_Schema...
View ArticleAdditional SAS storage for ML350p gen8
Hi,There are three (3) 300GB SAS drives in our server. How can I expand the storage capacity? Can I add more SAS drives as additional storage for backup?Thanks,
View ArticleNo Smart Array Controller found. HP Smart Array Controller or HP Dynamic...
Dear all,Modle: HP ProLiante 360P G8Recently Replaced the Motherboard in the Server.In System Information >>>> Storage showing as below"No Smart Array Controller found. ""HP Smart Array...
View Article