Microserver Gen8 - RAM support for "new" 16 GB UDimm ECC Memory Modules
Hello,I have a question regarding the memory module support of my Microserver Gen8.Currently it is equipped with an Intel Xeon CPU which itself is able to address up to 32 GB of RAM at dual-channel...
View ArticleConnection ProLiant ML110 G6 to StorageLoader
Hello,I want to connect Neo's StorageLoader to a ProLiant ML110 G6 server by a SAS cable, but I not really know how to do it. I want to use sas cable, because storageloader has interface SAS 6GB and FC...
View ArticleML 110 G7 get stuck after post screen
HiI got ML110 G7 Server get stuck and unable to do any thing. some time it get stuck at the post screen , or soem time on bios screen or some time s on OS mode. installed latest bios versions and no...
View ArticleML310e Gen8 V2 with Server 2016 Hyper-V
This server, despite being on the Microsoft HCL as certified for Windows Server 2016 (see https://www.windowsservercatalog.com/item.aspx?idItem=5034ab7d-e864-6747-9e38-df974f397de7&bCatID=1282 )...
View ArticleHP ProLiant DL360 G7 Fan Speed Issue
Hello all, I just got a DL360 G7 from a public auction and everything works fine. However, the fans go to about I want to say 50% speed then sometimes it drops down to where you can barely hear them...
View ArticleVMware vSphere 6 On HP ProLant DL360 G7 Questions
Hello, I am currently thinking about installing vSphere 6 on DL360 G7 and I have a few questions1. Is there a difference from vSphere and ESXI?2. Do I install vSphere, connect to it using the client,...
View ArticleML110 G7 Main board LED status
Dear HP experts.My ML110 G7 server gets stuck with in 2-5 min time ,every time I restart it. Sometimes it hangs during the thermal calibration process, sometimes on the bios program, sometimes at the...
View ArticleDL580 G5 no post with pcie card installed
Hello! I have a need for graphic card with a bit more performance on my old DL580 G5 than integrated ATI ES1000 can provide.The problem is, that machine wont boot, even more it would not even post if I...
View ArticleHP Smart Array P420 Controller - Error 1797 (FBWC Cache disabled)
Hello community,first of all, the hardware:HP ML310e Gen8 v2HP Smart Array P420 with 2GB FBWC with 2 Raid5 Volumes (Each 4 HDDs) I had a RAID Failure (2 Hard Drives Crashed in a Raid5 Configuration)....
View ArticleMachine Check Exception HP DL180 G6
Hi, Server is getting crashed after each 3-4 days with MCE errors stated here in ILO : http://prnt.sc/czheoz We'd also like to inform that we're using these same servers HP Dl180 G6 in other...
View ArticleHP Proliant dl120g5 does not start
Hello!!Tell me with this question. After the installation of the windows operating system and software for the card , rebooted the computer and it started beeping ... Tell me what to do , monitor what...
View ArticleAlertMail and o365
Hi,I've configured an o365 mailbox that has a valid license, I'm using this for all device emails since it's clean and neat.I'm hoping to configure iLO4 AlertMail with o365 but I don't see any options...
View ArticleArray controller P420i [Embedded] has reported that it previously locked up...
My server is down and need to cold boot.After server boot up and checked the system logs, an event message is shown:"Array controller P420i [Embedded] has reported that it previously locked up with...
View ArticleParity Initialization Status: Initialization Failed DL360 G5 P400 Array...
I have the above system with two arrays setup. Array one is RAID level 1 with two drives and is fine. Array 2 is RAID 5 with 3 drives. I also have a Global spare setup. logical drive 2 on Array B...
View Article[P410i] - Array is ready for recovery, but never rebuilds
One of my disks in a 2-drive RAID1 array died.So I replaced the disk. Now the array says, ready for recovery, but never recovers.Attached you will find the report from the controller.I uploaded a copy...
View Articleupgrade from H240 to P440 retaining RAID
Hi,Is it possible to upgrade the controller in DL80 from H240 to P440/2GB FBWC retaining the RAID configuration and without data loss? If yes, how it could be done?Best regards,Natalia
View ArticleHP Agentless Management Service not starting (OpenSUSE Leap 42.1)
Hello Forum,i have a problem with my microserver gen8. I installed the HP SNMP Agents, HP Health and the HP Agentless Management Service. The Agents are running, but when i start HP AMS i get this...
View ArticleHPE System Management Homepage 7.6.0
Hello,I just start deploying HP System Management Homepage 7.6.0 and for the machines receiving 7.6.0 the shortcut previously used is broken.... (Previous version using this shortcut 7.5.5)URL:...
View ArticleUnidentified network status on ProLiant DL380 Gen9
Hi, I installed win2012 r2 in new server ProLiant DL380 Gen9. Two network cables are conected to HP Ethernet 1Gb 4-port 331i Adapter but network status is Unidentified.Should I try NIC teaming what...
View ArticleProliant ML110 - Additional drive in SATA 5 or 6
Hi, I currently have 2 groups of drives, each a RAID 1 setup, utilizing the B110i RAID controller. This controller has a 4 drive RAID maximum.Ports 5 and 6 (3gbit ODD SATA ports) are not used, but I...
View Article