Recommendation for a video editing file server
Hi guys. I am looking to buy a refurbished server for my home office to use as a storage for my live projects. I work as a video editor, and, up until now, I have been using either my local hard disk...
View ArticleContact DL 380 Gen9
Hi, Team Memory upgrade planned for current DL380 Gen If you know the Memory Part Number, ILO is not set How to check the memory part number without shutdown in this state
View ArticleI would like to inquire about the DL380 Gen9 server.
안녕하세요현재 DL380 Gen9 서버를 3대 운영중에 있습니다.메모리 64GB 모델을 사용하고 있는데이번에 추가로 128GB 메모리로 증축을 하려 합니다.이 과정에서 메모리 PN 가 필요하다고 하는데서버 종료 / ILO 없이 메모리 PN 를 알 수 있는 방법이 있을까요? Google TranslatedGood morning Currently, three...
View ArticleTrying to confirm EOL for HP ProLiant Servers
I'm not able to look up this information on the HP website either with the Product Number and/or Serial Number. I need to know when the End of Life with HP is for the following servers. HP ProLiant...
View ArticleHPDL380 Gen9 GRUB! error: no such device: HPEZCD240
I have a DL380 and a 24 inches monitor HP Z24n and they were working OK until I replace the video card from Nvidia K620 to Nvidia NVS450. At this point, the DL380 couldn't detect the Z24n monitor. I...
View ArticleDL360 G5 - Porcessor Unsupported
Hello,I have changed my cpus in the DL360 G5 today, but now I get the 805-Unsupported Processor. What can I do to solve this problem?It seems, that I need the newest bios, where do I get this?...
View ArticleBase system device driver for ProLiant DL585 G7
Base system device driver for ProLiant DL585...
View ArticleInstaling Windows Server 2012 R2 on DL360e Gen8. Cannot Load Drivers
I am having issues trying to install server 2012 r2 on an old dl360e gen8 server. I have my installation on a usb stick and it boots to it. When trying to install it, I dont see any drives. I thought...
View ArticleML310E gen8 V2 - Four bay LFF drive cage - I see two different models
Good morning, I hope you understand my English, I write from Italy.I purchased a ML810e Gen8 V2 with 8 SFF drive cage.I want to buy 4 SFF cage hot-plug drive, I found two different models.This document...
View ArticleHP ProLiant ML10 v2 Server 4LFF Superior SATA
Hey,Before buying the server for our office, I need to clear some doubts. Product - https://zoom.com.kw/product/1/B01NH2WBTL/hp-proliant-ml10-v2-server-4lff-superior-sataCan I run windows 10 on it?...
View ArticleClik here to view.
Urgent: GL380, BIOS config for Win7 Kernel Debug
Hello,After consultation with MS they showed us how to do kernel debug on my laptop. Setting Up Kernel-Mode Debugging over a Serial Cable Manually. and msconfig screenshot: and the backside of machine...
View Article12 bay Dl380e G8 LFF - What RAID card do I need?
So we picked up a DL380e G8 12bay LFF, the 3.5" size, but there's no RAID card in it. There's only one port on the motherboard, for the onboard RAID, but if I want to use all 12 bays, I need to put a...
View ArticleEFI System Partition filesystem
What filesystems are supported for the ESP (EFI System Partition) on DL360 Gen10 hardware? FAT32? NTFS? Linux filesystems, such as ext4? I know the only filesystem required to be supported by the...
View ArticleSpare disk on raid 1 to be used to configure another raid 1
Hi everyone,Im new here btw. I have a Proliant DL360 G9 server with 6.30 firmware and configured with RAID 1 ( 2HDD bay 1 and bay 2) with 1 spare disk (bay 3). Datastorage is almost full so i bought...
View ArticleDL 360 G( storage array issue
Hello everyone, I have a DL360 G9 with an array attached. All the drives on the array are showing static green LEDS not a single flash and is not being seen by the server, has anyone had this before.
View ArticleConfigure another RAID 1 on DL360 G9 P440ar controller
Hi everyone, Is it possible to configure another RAID 1 on my DL360 G9 server with P440 ar controller? my current configuration is RAID 1 but i want to add another RAID 1
View ArticleBattery/Capacitor Status: Failed (Replace Batteries) on ProLiant DL360 G5
Hello,I recieved the following errors using hpacucli: hpacucli ctrl all show config detail | grep -i battery No-Battery Write Cache: Disabled Battery/Capacitor Count: 1 Battery/Capacitor Status:...
View ArticleClik here to view.
Dl360Gen10 - "Error 510 The ISntalled Number of DIMMs on one or more processor "
HI Team i came to collaborate with a new topic , Customers who are populating the server memory should use this documment were says exacly the way that we can use the memory slots and right channel...
View ArticleProLiant ML10 v2 PCIe SSD boot disk?
Can the HP ProLiant ML10 v2 Tower be configured to use a PCIe SSD drive for the boot disk?According to one of the answers on this question, the server apparently uses the first SATA port it can find a...
View ArticleDL360 Gen10 PCIE Slot 3 not PCIE Compatible?
We have a problem with DL360 Gen10 PCIE Slot 3. Most PCIE cards do not work in Slot 3 using the LP raiser (tried two of them), althought the same PCIE card works in PCIE slots 1 and 2 of the same...
View Article