DL120 G7 KVM on iLO3 is not avaliable remotely
I have some problems with accesing to KVM interface on iLO3 remotely (from outer subnet) by Java and Framework as well. On local computer it works perfectly. I already have made port forwarding on 443,...
View ArticleNot able to modify rebuild priority with ACU
Hello,On an old HP ProLiant G5 server, running Windows, I am trying to find why a Raid 5 array does not rebuild. I wanted to modify the rebuild priority with ACU to high, but it returns it could not...
View ArticleTool to find drives in alarm off a H220 controller
My group recently removed the Raid controllers we had and are now using H220 SAS Controllers. We put in these in a DL360 G8 that has a D6000 disk enclosure attached to the new SAS controllers. We can...
View ArticleProliant DL360e Gen8. Change Smart Array Controller
Hi, I'm thinking about changing the RAID controller on my HP Proliant DL360e Gen8 server. Currently has the integrated controller B320i installed.I have seen that the Smart Array P420 is compatible...
View ArticleDL380 Gen10 - Poor Memory throughput with two CPU configuration
Hi everyone,I've discovered an issue with the DL380 Gen10 servers running dual CPU's. The issue is that memory throughput is limited to around 10GB/s. I've benchmarked memory on the system with...
View ArticleChanging RAID card from 408i to 816i
If I replace a p408i-a raid card with a p816i-a raid card, will the new card read the drive and raid configuration off the physical disks, or will I have to configure from scratch and then do a full...
View ArticleHp dl585 g7 installing 4 GPUs cable configuration
What cables I need if I want to install 4 GPUs on DL 585 G7 they need less than 150w of power.I bought four sets of original HP cables but I cannot install more than 3 GPUs. I need just a proper...
View ArticleML 110 G9 server
Hello HP Expert Team,We want to use ML 110G9 server with CENTOS 7.0 64bit OS in RAID 1 mode.Please guide us whether RAID can be configured with Smart Array B140i Controller for CENTOS.ORAny additional...
View ArticleDL380 Gen10 Can't install Windows Server 2019 missing driver
Hi,I'm having an issue with Windows Server 2019 installing on a Gen10 DL380 with a p408i-a controller card.I've updated Intelligent Provisioning to 3.21 as was mentioned in another forum post for...
View ArticlePC3-10600E-9-10-E1
hiBoth PC3-10600E-9-10-E0 and PC3-10600E-9-10-E1 have the part number "500209-061 " For DL380 G6 server. when PC3-10600E-9-10-E1 2GB is installed in server running LInux red hat, after 3 - 5 day, the...
View ArticleHPE Proliant DL380p G10, will not boot from SPP usb
Hello everyoneI am currently running in to an odd issue. I have 8 Proliant Gen10 Servers, which I need to update the firmware on to the newest version (2018.11.0) using the SPP package. At the moment...
View ArticleHPE System Management Homepage and G10s
I understand from this memo that the HPE Management Homepage is no longer available on my HP DL 380 G10s. https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00022827en_us Great. What...
View ArticleChanging memory clock speed on DL380 G7
Hey there! I'm trying to tune my server, but I'm stuck with memory. There are 12 units of 8GB 1333mhz memory modules inside, but the highest speed the RBSU allows me to set is 1066mhz. Do I need to...
View ArticleUUID and Serial number issue
I have a DL380 G9 that displays the UUID as all zeros and no Serial number at all. It used to have a serial number displaying fine in iLO. How would I resolve this?
View ArticleConrep crash
I'm trying to run conrep on a Windows Server 2012R2 sitting on DL380G9 hardware to load an xml file that will set the BIOS. This was tested on other machines and works fine. The reference xml was...
View ArticleHP Proliant ML350 G5 BIOS
Hello,I need to update BIOS on an old ML350 G5 which is not in production and usupported.https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX-b80e134db9c14414b49e2e03de#tab-historyAs HPE does...
View ArticleVRM/PPM Monitoring tools?
Hi guys,Just curious if anyone could point me in the direction of what if any software or diagnostics i could use to monitor the PPM's or VRM's in DL585 GEN6. i have looked about the iLO and Insight...
View ArticleMove RAID/Disks from one server to another
HalloWe have a HPE ProLiant DL380 Gen10. The RAID controller is a "HPE Smart Array E208i-a SR Gen10".I think the feature is called "drive migration".Is it supported in this configuraiton?Thanks
View Articlehelp adding proliant dl to infosight
hello is it a requirement to have server managed by ilo ampack in order to add server to infosight?it looks like ampack is only supported on VMware - I do not have VMware.is there any other way i can...
View ArticleFBWC Module
Hello, i have two HP ProLiant DL380p Gen8 Servers, server-1 domain controller with Active Directory , DNS server , and File services installed and much work flow goes to server-1 . server-2 is used...
View Article