Probleme beim Server HP DL380p Gen8
Hallo Gemeinde,habe Probleme beim meinen Server HP DL380p Gen8 , der in einen Kritischen PCI-Fehler läuft wennich meine GRafikkarte unter ESXI 6.0 an eine Windows 10 VM durchreichen will.Install der VM...
View ArticleDL560 Gen10 was rebooted often by itself at dawn
Hi Everyone,We have a DL560 Gen10 that rebooted often by itself, especially at dawn.In the morning, we checked the Windows Server 2016's event log to find out, what's going on?In summary, we found...
View ArticleClik here to view.
ILO3 and SNMP
Hello,I don't know how to configure ILO3 SNMP in order to entered V2 public and access to my monitoring server.ILO can't connect to monitoring server and I've installed ILO3 latest version.MIB walker...
View ArticleCache Module Status failed (battery is ok)
On my HP Proliant DL 380 Gen9 server I have an error.In ILO on the storage tab, the 'cache module status' is set to failed. However when I look at the HP Smart storage battery the status is ok.Any...
View ArticleML150 Gen9 - FANS and PSU FAN on when server is shutdown
I recently upgraded one of my lab servers to a ML150 Gen9 and noticed that when the server is shutdown the PSU Fan is still on (iLO says the server is off). Is this normal and apart from turning the...
View ArticleDL360P Gen8 - P420i - Controller Lock Up's
Hi folks,Seen a lot of issues and there sollutions over the last years, but this one is killing me.Im the private owner of a DL360P Gen8 and while testing this server, all went fine.When I placed the...
View ArticleDL380 G5 won't boot past Broadcom NetXtreme II Ethernet Boot Agent
I have an old DL380 G5 that I use for learning and testing purposes, but suddenly it won't boot past the Broadcom NetXtreme II Ethernet Boot Agent v2.8.5.I then tried transfering CPU's and RAM to an...
View ArticleDL560 Gen10 turn off or slowing POST Fan Noise
Dear everyone,is there a way to DL560 Gen10 to turn off or volume down the POST Fan Noise?Thank you.
View ArticleHP ProLiant DL580 G7 Server: MIB's
Hello.Can't find MIB's for HP ProLiant DL580 G7 Server..10x!
View ArticleML30 Gen10 conversion to 4LFF hot-plug??
I've just received an ML30 Gen10, which turned out to have a plain DIY drive cage for 4 LFF drives. This is a little surprising for a 'server', particularly given that the vendor website showed images...
View ArticleDL180 G6, Smart Array P212, problem with cache battery
hii replaced battery for P212 cache with same part number 460499-001 and same spares number 462976-001 (same battery model, only manufacture date is different)in ssa i get error:"The cache for Smart...
View ArticleDL560 Gen10 temperature
Dear everyone,Sorry I wanna ask about DL560 Gen10 temp, especially within I/O Board [51-PCI 3 ] and [47-PCI 1], both in X=11, Y=11 , is it normal to have a 76'Celcius temperature in idle state?Thanks.
View ArticleUnable to ping ILO but able to ping gateway
Hello,i have configured Dl360 Gen10 HPE server. we have connected ILo cable and its blinking. Able to reach gteway but unable to ping server Ip address from my network. Need help on this
View ArticleDL120 Gen 9: Warning Authentication on this drive carrier failed due to a...
Hello, I have an issue about DL120 Gen 9 hard drive. I am using Smart Array B140i. My company bought a server DL120 Gen 9 whose drives are SP Solid State Drive 3 years ago. 3 weeks ago, one drive was...
View ArticleRAID5 disk with Degraded Predictive failure() and Unrecoverable Media Errors...
Hello everyone,I have a HP ProLiant DL380p, with a RAID5 with 4 disks, where I had 2 logical disks running on those disks. Yesterday, I notice that I had one disk with the followin status: Degraded...
View ArticleML350p gen8 Storage Controller Driver will no install
Good Morning All!I have an old girl we are trying to get going as a test environment to train people up in. The system will install Windows Server 16 fine. When I boot the machine it will not make it...
View ArticleLogical Drive Not Visible
I have a new ML 110 Gen 10 server. 2 physical drives on which I have created a single array with 2 logical drives. One smaller logical drive for the operating system, one large drive for data. I...
View ArticleEnable HPE Proliant Update , Third-Party Software Updates in SCCM
Hi , I am trying to install the Drivers for Gen8,Gen9,Ge10 via HPE ProLiant Updates Software Updates via SCCM so far I have enabled Third Party updates and created a custom catalogue and gave Download...
View ArticlePCI Bus Error (Slot 0, Bus 0, Device 0, Function 0) logged on stuck reboot...
Hello, a server DL380 Gen9, with Windows Server 2016 installed hangs on reboot and only can be started by Cold booting from iLo.The IML logs Critical errors:PCI Bus Error (Slot 0, Bus 0, Device 0,...
View Article