DL380 Gen9's hang booting from spp iso
I have 5 identical DL380 Gen9 servers that were pulled from remote sites and reinstalled in our data center. Each one was erased via F10 Intelligent Provisioning. ILO's were cabled and configured. I...
View Articleilorest: get temperature sensor reading
I am new to ilorest. I would like to get the current reading of a temperature sensor on the box.This could get me all the Fans and Temperatures:curl -X GET...
View ArticleML350p Gen8 Linux Blink LEDs
I'm trying to control the disk enclosure's leds from Linux. They do not seem to show up as "generic" sas enclosures (can't use sg_ses or similar) as far as I can tell. How can I cause LEDs to blink so...
View ArticleDL160 G6 disque dur non reconu
Bonjour,J'ai acheté deux serveur Proliant DL160 G6. - vios:033- disque dur HP réf: 454274-001 de 450Go SAS LFFAprès plusieurs Reboot, en Compatible, en Raid , ou AHCI, le(s) disque(s) ne sont pas...
View ArticleDL360e gen8: "Error: 1611-Fan 8 failure". Server shutdown and does not boot!
I have a DL360e gen8 server with four fans in it. One of the fans failed, causing the server to shut down with the error "1611-Fan 8 failure" (i.e., the server didn't shut down due to high...
View ArticleDL 360 Gen10 Universal SATA - Smart Array P816i-a SR cabling?
We have recently installed some DL360 Gen10s, all with HPE Smart Array P816i-a SR Gen10 Controllers (804338-B21) and HPE Universal SATA HHHL 3yr Wty M.2 Kits (878783-B21), each with 2 x 240GB M.2...
View ArticleDL360 Gen10 Server 2019 - OS will not install right
I have a DL360 Gen10 and I am trying to install Windows 10 on it. We have had this server for about a month and still cannot get the OS on it. HP keeps "trying something else" but 2019 will not...
View ArticleProblem with Smart array P822 VmWare PCI passthrough on Dl380p Gen8
Hello I'm trying to use PCI passthrough in vmware on an HP Smart array P822 Raid card, but when the VM "starts" the server screws up the fans to max and gives IML error code "Drive Array Controller...
View ArticleProliant DL20 Gen10 WoL
Good Evening,When I try to sent WoL packet to my Proliant DL20 Gen10 server (after system shutdown), nothing happens. I am using IP address of iLO and mac address of shared port. I want the server to...
View ArticleML10 Gen9 SUM problem
Hello, is it possible to use SUM (SPP) for HP ML10 Gen9 or do I need to install the drivers, firmwares individually? If I want to use SUM, I get an error that the ILO Channel Interface Driver is not...
View ArticleHibernation/Sleep impossible
Is there a way to enable hibernation/sleep in HP Proliant DL20 Gen10? When I try to hibernate Windows Server 2019, I get a message that it is not supported by the firmware.
View ArticleRaid Array on a DL360 G5
Hi,I have a DL360 G5. One of the raided disks is failing. I have a replacement but looking on the raid array I also have a warning sayingSmart Array P400i in Embedded Slot has one or more cache...
View ArticleDL360e gen8: "The Integrated Management Log is empty"
Using the iLo port to diagnose my servers. One of them has an empty Integrated Management Log. It's always empty. How can I make it start logging?Firmware as shown in this screenshot:...
View ArticleIn new hard drive existing RAID configured but Disk Management shows...
Hi,I am using HP DL380P G8 server, OS window 2008R2. I have already RAID 5 configured in drive with (600GB*4) 1.63 TB space but i need to extend my D drive. So i used HP Array configuration utility...
View ArticleDL 380/G8 SSA error
Hello,We have a client with a DL380/G8 who lost 3 drives in a Raid5 array. They replaced the drives, but needless to say the Virtual Disk that was on it was lost.They asked us to come in and build a...
View ArticleUbuntu 12.04 server not installed in hp dl380 9 gen server
Ubuntu 12.04 server not install pls help me
View ArticleDL 380/G9 SSA error
Hello,We have a client with a DL380/G9 who lost 3 drives in a Raid5 array. They replaced the drives, but needless to say the Virtual Disk that was on it was lost.They asked us to come in and build a...
View ArticleHP Proliant ML350 G6 RAM connfiguration
HI there, I have a HP Proliant ML350 generation 6. A while ago it refused to boot, so I took out the RAM.1. I got it working again by inserting 2 x 512 RAM sticks (See photo).2. The remaining RAM I...
View ArticleProLiant DL 380p Gen 8 PCI SATA-Karte
Hi Members, i search a HP-Certified PCI SATA-Card for my ESXI-Host. I need the Passtrough Option for ESXI.
View ArticleDL180 G5 Flashing BMC SDR/Config then shuts off
We have a DL180 G5We see the messsage:Flashing BMC SDR/Config......Please waitDO NOT power cycle or resetthe system, may take several minutes...Done.BMC Fan Curve Updating...Done.It then shuts...
View Article