AHS isnt working on Windows Server 2016 for ML350 Gen9
Hi All,Ran into an issue trying to use AHS log for Windows 2016. We have an ML350 Gen9 with iLO4, and am attempting to run the AHS locally. I have the latest controller driver and channel interface...
View ArticleDrives must be connected/configured as standalone drives
Hi, is there any way to configure the inbuilt array on a HP DL380 G9 as standalone drives?Reason is I am trying to do some data recovery from the faiiled array, all software I have found requires this.
View ArticleProLiant ML350 G9 with excessive fan noise during normal server operation
I have a ProLiant ML350 Gen9 which the fans come on regularly making a lot of noise. There are no failed fans (four fans installed) and the temperature is below the threshold levels.There are two...
View ArticleTrying to install Kingston SSD Drive on Proliant DL360p Gen 8 with no avail
Hi AllI wonder if you can helpI am tryingn to make a Kingston SSD as boot drive for a Proliant DL360p Gen 8However the disk is not being phisycally detected and I cannot find a way on how to enable...
View ArticleSmart Array B140i vs P440 performances on RAID5 of HDD (not SSD)
Hello,I have ML150 Gen9 with integrated Smart Array b140i Software RAID Controller, with 5 x 1TB SATA HP Disks in a RAID5 array. Server is running ESXi 6.7.R/W performances are poor, especially W on...
View Articlepro Liant Server ML130e
Can A Pro liant ML310e Gen 8 running Windows 7 server software be upgraded to Windows 10 server software?Or does require a new server and software?
View ArticleProblemas {ML110 Gen9 server problems}
Bom dia, Estou com um servidor HP ProLiant ML110 Gen9 que liga e depois de uns 5 minutos desliga e so vai liga no dia seguinte, ja fiz varias pesquisas consultei alguns colegas que trabalham na área e...
View ArticleDL380e Gen8 - system board 8 memory error - question.
Hi HP community,I have a little problem with one of HP 380 servers. I can see "System board 8 memory" sensor in error state when I run sensor state command in esxcli. What is an interesting thing that...
View Articlenvme EX900 1TB AND KIT 878783-B21 DL360
Hi, I need a fast hard drive but the information is not critical. So I had thought about placing an EX900 with the M2 KIT.I would only have that disk so that it would be bootable, do you know if the...
View ArticleDL360 G5, Unable to open RBSU
I'm reconfiguring a newly acquired DL360 G5 but I cannot access the RBSU; hitting F9 on the keyboard gives me a beep from the on board sounder, but doesn't open the RBSU. I've tried the ROM recovery...
View ArticleHP DL380 GEN9 Server " Newer shutdown " only standby
Hi i have HP DL380 GEN9 Server, server not shutdown , press button power and make standby
View ArticleClik here to view.
P408i-a cache status
Hi,We have some DL380 GEN10 servers with P408i-a SR controller and the cache status is "not configured":HPE Smart Array P408i-a SR Gen10 in Slot 0 (Embedded)Controller Status: OKCache Status: Not...
View ArticleInstall Vmware on HPE ProLiant ML350 Gen10
Hi , i am new to hpe server .i have an HPE ML350 Gen10 (3106 1P 16G 4LFF) with default Raid controller i think is (SA100i).i want to install Vmware on this server and i want to configure Raid 10 .i up...
View ArticleProliant DL585 G2 Firmware and BIOS
Hello friends,I have two identical proliant servers (DL585 G2) in a test environment and I want to try to set both of them to the same firmware and bios version but I can't find any updates for the...
View ArticleRIBCL script to read / modify ILO parametres
HelloI want to retrieve some information from the ILO, after which I will like to modify them.through an ssh connection on the chassis, i want to get : Server namedate / time of the ILOTimzone (located...
View ArticleAccreditation of HPE Engineers dispatched to site
As part of a health & safety review, the organisation I work for has insisted on any 'contractor' attending site that may need to work on equipment at site needs to be 'SafeContractor' approved....
View ArticleUploading a private CA (root/intermediate) certificate to iLO?
Hi all,We have already uploaded signed certificate from private CA.We are having our iLO scanned for security vulnerabilities by Qualys.Our iLO is on a network segregated from the production network by...
View ArticleUpgrading PSP version
I have some Proliant DL385p Gen8 servers that are running a very old PSP version of 2014.09. I read in one of the older readmes that you shouldn't install a newer PSP if it isn't within 12 months of...
View Article