HP Proliant ML350 G5 SAS Hard disk Problem
Hi, I am getting problem in HP Proliant ML350 G5. Some few days back one of the SAS HDD failed. It was 146GB SAS 15krpm HDD. We got new one which is 146GB SAS 10k rpm HDD. Its on RAID 1(1+0)...
View ArticleFull Slot RAM
Hi,Please let me know if I want to use 24 slots of RAM in DL380 G8 while i have 2 processor, does it matter if i use single rank or dual rank modules?
View ArticleSlow Server Boot Time... ProLiant ML350e Gen8
I'm working with this server to write up documentation on setting up Windows, Hyper-V, VDI etc etc... And the reboots are really starting to be a drag... Is there anything that I can do, even...
View ArticleDL360 G5 BIOS corrupt. Need help
Hi BIOSwas damagedwhen installingthe Service Pack.The serverwill not boot, black screen,the keyboarddoes not respond,the lights aregreen, thefans are working.Cleaning CMOSthroughSw1(S6= On)did not...
View ArticleML 350 G5: server does not switch off but reboots after "shutdown -hf now"
Hi, we have a HP ProLiant ML 350 G5 running SLES 11 SP2. If i shutdown the server using "shutdown -hf now" on the console, the server shutdown itself, but immediately starts again and does not switch...
View ArticleHow to populate dimm slots on DL160G5?
Hi forum, any memory professional over here? I've got a DL160G5 with 4GB memory, 4 modules in slots 1, 3, 5 and 7. These are single rank modules (part no. 398707-051). Now memory must be extended to...
View ArticleDL380p Gen8 - Requires Addition Controller for optional +8 SFF Cage??
Per the quick specs for HP Proliant DL380p Gen8 "NOTE: The optional +8SFF drive bay requires an additional internal storage controller be selected. HP recommends the HP Smart Array P420/1GB FBWC 6Gb...
View ArticleACU install issues
I was sure if this should go under storage or not. I am trying to get HP ACU installed on an inherited server at my workplace and everytime I try to install it I get failed install message that says:...
View ArticleAny way of disabling embedded NICs
Hello I have a HP ProLiant ML570 G3 Server with a troublesome integrated NC7782 Gigabit Server Adapter.Is there any way of disabling the embedded NICs (say in the BIOS) so I can get my server up and...
View ArticleClik here to view.
DL380e Gen8 (PN: 668665-xx1) - HyperThreading Support
Hi, Our client wants to purchase this server model [DL380e Gen8 (PN: 668665-xx1)] and his question is 'does this server supports hyperthreading?'. Upon checking on HP Product Bulletin it has HT on the...
View ArticleCan I install Server 2012 on my DL385 G2/G5
Hello I've tried to install Server 2012 on a DL385 G5 but after the install it fails to boot giving a blue screen stating that it failed to start and reboots a bit too quick to read the error properly....
View ArticleDoes support SATA HDD , HP Proliant DL380 G7
Hi,I am having Hp Proliant DL 380 G7 server with 146 GB SAS HDD. I am just planning to upgrade the storage. Please let me know, does it support SATA Type HDD ? Thanks
View ArticleCustom Operating System Deployment using Intelligent Provisioning
Hi,we are evaluating the option to remotely deploy a custom Windows 2008R2 installation using Intelligent Provisioning. Basically we are starting a WinPE to run an Off-line SCCM Installation of the...
View ArticleDL380p Gen8 - Requires Additional Controller for optional +8 SFF Cage?
Per the quick specs for HP Proliant DL380p Gen8 "NOTE: The optional +8SFF drive bay requires an additional internal storage controller be selected. HP recommends the HP Smart Array P420/1GB FBWC 6Gb...
View ArticleClik here to view.
roblem With Setup HP RAMS 9.20 on ProLiant DL380p Gen8
hi guys i have buy a ProLiant DL380p Gen8 with 2 Processors and 4x600GB disk Drive. i had configurated my Hard Disk as Raid1+0 and Update all of firmware from A to Z. when i Put HP RAMS 9.20 Appliance...
View ArticleFeet for the ML 350p Gen.8 Rackserver
Hello, i have a problem.i have order an ML 350p Gen.8 Server in ht Rack Version, but i wisch to use the Server as an Tower.Is there any way to get the feet from the Towermodell for the Rack Server ?
View Articleupgrade 2nd processor
I need to purchasethe 2ndprocessor forDL380G5server, type ofprocessor: IntelXeon4CE5335@2Ghz8MbL2.
View ArticleDL 180 Transfer Rate
I have a DL 180 G6 server with the P410 controller with 512 Cache. I know the transfer rate is support to be 3 GBs with SATA drives. I'm only getting Transfer rate of 20-30Mb The drives I'm using are...
View ArticleNo Boot on 2nd processor upgrade
I have a Proliant ML350 G5, currently single CPU and want to upgrade to dual CPU. I have purchased and installed the components listed below, but the server will not boot (bring up BIOS).- Matched pair...
View ArticleFitting 8 drives into an ML310E
I'm looking at buying an HP ProLiant ML310E server. On paper, it is perfect in pretty much every way, except for one: it says that it only supports 4 hard drives - I need it to have room for at least...
View Article