ProLiant DL785 G5 POWERS UP RUNS ON FULL FANS AND GOES NO FURTHER
P.S. This post has been split off from other thread. - HP Forum Moderator
View ArticleProblem with installing: Proliant Dl320e gen8 and windows server 2012
Hi, i have problem with installing Windows Server 2012 on my new HP server.After booting from CD i have got message : Insert valid disk with disk controller.Please help me. Very urgent!...
View Articlewhat is "NIC Active Health System Agent" about ?
Hi, Found this software in Linux section of Gen8 Proliant's drivers. No equivalent for Windows. What is the purpose of it ?
View ArticleProLiant DL380 G7 - Can't detect new SAS drives
Hi,We've had this HP server for ~3 years, wanted to add another 2xHDD (SAS) to go with the existing 2xHDD (SAS) for a total of 4xHDD (SAS). The new drives are not being detected by the system at all,...
View ArticleShared Storage between 3 DL580 G7's
I have three of these monsters but want to setup a virtual enviroment with HA. I'm aware of the software answers but I don't want to go that route so here are couple newb questions. I'm going to need...
View ArticleProliant DL380 G5 with SAS external 6GB/s for LTO-6 Autoloader
Hi, I've a problem to find a SAS-HBA with 6GB/s for my DL380 G5I want install Win2008R2 on it und backup with Novabakcup on a Tapeloader with LTO-6 with external SAS cable. Anybody knows a Host Bus...
View ArticleSPP SUM local firmware repository
We build alot of ProLiant systems continually and need to implement some kind of nightly batch process to ensure we always have the newest ProLiant firmware to push out from our PXE server. How do I...
View ArticleDL180 G5 Memory trouble
Hello!We have 2 memory module 1G 1Rx4 PC2 - 5300P - 555 - 12 - H2 in 1 and 2 slots. With It installed server works well.Now I try to add 2 more modules 2Gb 2Rx8 PC2 - 5300U - 555 - 12 - E3 in 3 an...
View Articleincrease disk space in a raid 5 array on a ProLiant ML350 G6
Hi, Our server (ProLiant ML350 G6) has a raid 5 array with 4 disks of 300Gb. We are getting short on disk space.Can I replace the disks one by one with a type of 600GB? Or what is the procedure to fix...
View Articlethe Overtemp LED - amber during boot. The boot in a loop does not pass POST
As in the subjest, The server reboots all over again does not get to POST test. The amber LED "overtemp" gets on. Any sugestion?
View ArticleML350 G5
Hi there guys, i have been having issues with my ML350 G5. I got an email saying the server was not responding, when i physically went to the server i found it powered down with 1 of the PSU's dead. I...
View ArticleDL380 G6 with P410i controller and a drive in predictive failure status
...and I was going to yank and replace this drive once I verified that all of the other drives were good but another support person I work with claims that, since this drive is still actively being...
View ArticleDoes Smart Buy ML310e Gen8 v2 4U Tower Xeon QC E3-1220v3 Come with video support
Hello,I want to buy a Smart Buy ML310e Gen8 v2 4U Tower w/Xeon QC E3-1220v3 processsor but I see online that the Xeon QC E3-1220v3 comes with no graphics support. I want to confirm that the machine...
View ArticleUtter frustration with HP site downloading SmartStart software
We have a DL380 service under maintenance contract but no longter under warrantly. It had a single hard disk failure so we contacted HP and they sent out a new disk, this was installed and now we have...
View ArticleSurvival to Intel Bug Interrupt-remapping
Dear Colleagues: Reading information on the internet about a bug in a family of Intel's chip and reviewing our inventory of hp servers, which include models: Gen8 DL380p Gen8 DL360p DL380 G7 It...
View Articlehp proliant ml310e gen8 server RAID
HiI have hp proliant ml310e gen8 server with windows 8 and 1TB Hard disk ..My Q is can add new 1 TB Hdd and config raid 1 laterAny data loss ?Is that risk?
View ArticleInsufficient Fan solution - DL385 G6
I have suddenly started getting the 'Insufficient Fan Solution - Shutting down' message on boot, saying that fans 2 and 3 are not working, they are working, and I have tried swapping them around with...
View ArticleExpanding RAID 1 Capacity on Proliant ML350 With Smart Array 641 RAID Controller
Hi, I have a Proliant ML350 Server running server 2003 SBS with an existing RAID 1 setup and need to expand HDD capacity. I have propagated the existing OS and data to larger drive by sequentially...
View ArticleDisk Failure Notification
Hi there, I've recently implemented 2 x ML350p Gen8 Servers. Each with 8X600GB SAS drives. Both units are working really well and I'd like to setup some disk failure notifications, which will send...
View ArticleiLO 1.96 upgrade failure
Hi I've been doing some digging into iLO firmware upgrade problems other people have been experiencing but none have really drawn any conclusions. We have a number of HP Proliant DL380G4 servers...
View Article