DL380 gen 6 - Hardware acceleration - not supported
Hello, all.invmware esxi 5.1has a parameterhardware acceleration -whyitisnot supported,althoughthe firmwareonthe BIOS, and firmwareraidcontrolleristhe latestupdated,installed the latestdriversand...
View ArticleProliant 350ml g5 crazy shutdowns
Hi I got a strange problem with a costumer of mine... They have a 350ml g5The server randomly shuts down with internal led blinking red. The motherboard is showing amber led for cpu 1 and the red one...
View ArticleVery slow speed issues in ESX 5.1/5.5 with BL460c and nc382m in iSCSI
Hi all,After doing a couple of days research and trying firmware and driver updates I run out of ideas on what could be the problem with a Bladeserver BL460c and a mezzanine card nc382m (Broadcom 5709S...
View ArticleDL385 G6 server reboots during CD Boot of VMware ESXI 5.5
Ok, so I'm trying to load Vmware from a boot CD on my DL385 G6 server. During it is software load, the server just reboots..locks up and reboots rather. I was looking into maybe doing a BIOS update,...
View ArticleClik here to view.
wrong Temperature settings on DL380 G8
Hi, I get a temperature alarm reported on and off on my HP DL 380 Gen 8. I noticed the following after troubleshooting. The Threshold of the POWER SUPPLY BAY is reported in ILO as:14-P/S 1 Power...
View ArticleDL320e Gen8 v2 Drive options
Hi, I hope someone can help. Ive got a DL320e Gen8 V2 server with the two LFF non-hot plug drive blanks.From what I can see, there is no actual backplane to support Gen8 Drive trays. From what I can...
View ArticleCannot reach download page for my server
I'm searching for drivers forr my ML310e Server. If I search for the product the next page appears: http://www8.hp.com/us/en/support-search.html?tab=1#/qryterm=ml310e&search_searchtype=s-002 When I...
View ArticleFailing Server RAID Migration
QuestionI have a server that I can hopefully move the drives from it to another server. Current server:HP DL360p Gen8SA P420i Controller New ServerHP DL380e Gen8SA P830 Controller Could I move drives...
View ArticleIssues with DL380/360 G6 in either Ilo or hpacucli
Hi I am experiencing some strange behaveour onto my DL380 and DL360. So I have a hp license for raid6 and I had build an array consisting of 8 HDD ( 7 are WD 7500 BPKT and 1 is WD 7500 BPKX ). The...
View ArticleChange RAID 5 disk numbers
Hi Everybody We have a hp Proliant dl380 G7 with a RAID 5 array resides on 8-146GB hard disks. I've installed ESXI5 U1 on this array. Now according to our company grows we need more disk space but we...
View ArticleESXi on a DL360 G6 - No Network Adapters
Hello, I am trying to install ESXi 5.5 on to a DL360 G6 but I am having an issue where the ESXi install is not recognising the network card (onboard). The ESXi installation starts but part way through...
View ArticleHP NIC Teaming Failure
Hello All,We are having HP Proliant 350 G6 servers, and teaming is configured on those server with 2 NIC's. HP network configuration utility is installed on the server to do the same. But issue is,...
View ArticleDL385 SmartArray 6i add disks to RAID5 steps
I will be adding 2 disks (146 GB SCSI) to the current 4 disk array to fill the slots at Thanksgiving, and would like to know the correct sequence of activities. From what I have read, I should do the...
View ArticleHP Proliant DL 180 G6 - Add a hard drive
A salute to theforum,Ineed toadd a newSATA driveto my serverHPProliantDL180G6.Currentlythere aretwodisksinRAID1the sizeof1TBeach andfor a totalof1Tb.The new hard diskI wouldset it upnormally andhave...
View ArticleProLiant ML350 G6 Server doesn't boot, No any LED lights
Hi all! We have been using this HP ProLiant ML350 G6 for several years (long before I moved into this company) it has always been working just nicely. But yesterday, I attempted to power it on...
View ArticleRemove Physical Drive from Array
I have a HP Proliant DL 380. I have created an array that contains 3 physical drives. I need to remove one of the drives from the array without losing the data. I have tried using the ACU but there's...
View ArticleRaid fails are disk change
ProLiant ML150 G2 – Windows 2003 standardRaid Controller adaptec 2610sa with 4 160gb drives in raid 5 configHP Storage Manager Agent reported a failed drive. I checked the server and saw a constant...
View ArticleEnd of life and support
Please if youcan help meknow the date ofend of lifeand supportthe following servers,and if you can get me the source of information: HP PROLIANT DL585 G2 8218 2.6GHZ 2P 4GB PC5300 RACK SERVERHP...
View ArticleHP IP Console Switch G2 2x1Ex16 Console cyclic reboot
Console: HP IP Console Switch G2 2x1Ex16 ConsoleFirmware 1.10.9.18433 When we start up the console, it attemts to start up, then in debug appears message "watchdog reset occured" and it reboots.Boot...
View ArticleHard Drive for Proliant ML350p G8...confused
Hi All, I have a Proliant ML350p G8 and I need to get new hard drives, the part number of current hard drives is 689287-004, this HP LIST says it belongs to MSA storage system and that the spare part...
View Article