I have a Proliant DL320 G5 server with the embedded raid controller configured in a RAID1. The other day the system logs indicated an issue with Disk0. I went into the Raid controller and ran a verify disk on Disk0 and it failed almost immediately. I ordered a new hard drive and replaced Disk0 with the new drive. I then went into the raid controller and ran a rebuild on the array. The rebuild gets to 96% and then fails with the following error;
"Media error happened during the data transfer. The array will not be optimal."
I ran a verify disk on both disks0 and disk1 and both were completed succesfuly. I tried the rebuild again and it keeps failing at exactly the same spot.
Anyone have any ideas how I can get the raid working again?