Quantcast
Channel: ProLiant Servers (ML,DL,SL) topics
Browsing all 10362 articles
Browse latest View live

HP BL Proliant Server

Hello All, Often HP Proliant BL Server gets restarted, We could find the error in IML Log that "Disk Array is not configured"  What will be the possible solutions? Thanks in Advance.

View Article


Image may be NSFW.
Clik here to view.

Proliant ML350 - failed NEC98431 + degraded smart array controller

Hi! I have some troubles with a Proliant server. Here are the informations from the System Management software :          I already switch the smart array part 2 days ago but the System Management...

View Article


if HP Intelligent Provisioning can install RHEL using non-HP media?

HP DL360p Gen8 has built in Intelligent Provisioning OS intallation. Will it work with stock RHEL bought onhttp://www.redhat.com or I have to buy Linux only from HP directly ?I don't want to buy Linux...

View Article

Proliant DL320 G5 Raid 1 Rebuild error

I have a Proliant DL320 G5 server with the embedded raid controller configured in a RAID1.  The other day the system logs indicated an issue with Disk0.  I went into the Raid controller and ran a...

View Article

Proliant DL380e Gen8 keeps crashing (PSOD) after upgrade to HP customized...

Hello HP community, I already briefly discussed the issue in VMWare communities, see https://communities.vmware.com/thread/491027But this was not really leading to a resolution. I maintain a newly...

View Article


HP Intelligent Provisioning formats filesystem without any confirmation

I've tried to use HP Intelligent Provisioning 1.61 to install RHEL7 on my HP DL360p Gen8.I've selected "Manual" installOnce clicked "Next" installation started - my disc was formatted without any...

View Article

Rebuild Dl165 G6? How can I get the initial HP drivers/utilities loaded?

Easy Start CD does not apply to this one model (per HP Easy Start docs), SmartStart 'not supported model' (have tried 8.4, 8.6 and 8.7 just in case), and drivers cannot be loaded as .exe via cd-rom...

View Article

Proliant SE316m1 where I can find Firmware and decrease the fans noise?

Hi All, I have recently bought a Proliant SE316m1 but I cant find any help, drivers about this model. The bigges issue I have got is the fans speed. Al I can do is to get to 50% speed but this is still...

View Article


DL365 stuck on HP Proliant Invent spash screen

Hi I had this happen to me and thought I would post my solution. I tried setting the maintenance switch to 6 and back no joy, ran the server on 1 CPU and tried changing CPU, again no joy. My solution...

View Article


Smart CD for Server 2012 R2 ML110 G7

Hi I am trying to look for a  Smart CD for Server 2012 R2 ML110 G7?  Can anyone post a link?  The only one I found went to Server 2008 not sure if that will be applicable for this?  I did google but...

View Article

RBSU don't start with F9

Hello everybody, i have ML350e Gen8 5U Tower Server. My problem is that i can not enter the RBSU. If i push F9 (or F1, the same problem) ,after the POST, the monitor goes to standby  and the servers...

View Article

DL360p Gen8 - RHEL 7 utility for network cards teaming?

In Windows Server 2008 R2 I've used...

View Article

SC08e HBA on HP DL380G5

Is it possible to connect server DL380G5 to HP MSA P2000 G3 SAS using SC08e HBA? In quick spec for HBA there is no DL380G5 on supported server list, but server has PCI-E slots. It is acceptable in that...

View Article


P410i / DL380G6 Raid config.

Hello!We want to install 8 physical drives with raid 1+0. So we get 4 logical drives.But when we try to install the third logical drive we get the following message:(Two logical drives are no...

View Article

2x U320e HBAs in DL160 problem

Hi,i want to add two U320e HBAs to my DL160 server. If i only add one, the server boots fine. But with two controllers built in, it hangs on boot, when controllers start searching for devices. if i'm...

View Article


E200i Array not rebuilding

Hi, I have ML350G5 Server which has 500GB x 4 hdd with RAID 1+0 for the first two and another raid 1+0 for rest two drives.Out of four hdd 1 hard drive replaced of bay 1 and it was properly rebuild....

View Article

HDD caddy

Hi guysI've just received a DL380P Gen8;at my suprise the disk that have been purchased(P/N:627114-002 & 632639-001) with it didin't fit in the SFF 8 SFF HDD bay(P/N 672146-001)now I'm trying to...

View Article


HP Server Proliant dl360 G8 - Raid Controller P421i zm

Hello,I have purchased a DL 360 with P421i zm raid controller.I have configured the server with Rais 1+0 and now i want to purchase a Raid Controller p421i-512MB.My question is if it is possible to...

View Article

Help Proliant DL380 E200i SmartArray Controller Fails To Initialise

Hello, i have a problem with my  DL380 G5, recently add a pair of SAS 300Gb hard disk, but i have problem, the server can´t boot its show me this warning This is the error: 1783-Slot 3 Drive array...

View Article

SUM scheduled updates

Are scheduled downloads available as a feature in SUM version 2014090? For example, it is available in...

View Article
Browsing all 10362 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>