Good evening.
I've installed, with "redundante" configuration, of two 3,06 intel Xeon processors. Fully redundant with two PSU. I'll try put this server on folding at home.
I'm using RAID 0 array.
I'm trying use total capacity of the two processor, but I don't know what firmware, or how configure it on proliant.....
kernel version:
3.11.10-301.fc20.i686
at this time, these are the detected options by dmesg
[ 6.068819] microcode: CPU0 sig=0xf29, pf=0x2, revision=0x15 [ 6.069107] microcode: CPU0 updated to revision 0x2d, date = 2004-08-11 [ 6.069131] microcode: CPU1 sig=0xf29, pf=0x2, revision=0x15 [ 6.069194] microcode: CPU1 sig=0xf29, pf=0x2, revision=0x15 [ 6.069477] microcode: CPU1 updated to revision 0x2d, date = 2004-08-11 [ 6.069491] microcode: CPU2 sig=0xf29, pf=0x2, revision=0x15 [ 6.069536] microcode: CPU2 sig=0xf29, pf=0x2, revision=0x15 [ 6.069819] microcode: CPU2 updated to revision 0x2d, date = 2004-08-11 [ 6.069835] microcode: CPU3 sig=0xf29, pf=0x2, revision=0x15 [ 6.069880] microcode: CPU3 sig=0xf29, pf=0x2, revision=0x15 [ 6.070159] microcode: CPU3 updated to revision 0x2d, date = 2004-08-11 [ 6.070329] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
But I'm not truth that both processor are working.
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
13277 ilkyest 39 19 131268 66688 3080 S 285,4 1,9 50:22.64 FahCore_a4