HP DL380p G8 + MSA 2040

I am using DL380p G8 with one 4port 331FLR 1G NIC and one 2 port 530SFP+ 10G NIC, all of them are connecting to a MSA 2040 with iSCSI.

When I try to create MPIO on the server, it works, unless I reboot the server, the disk connected by 530SFP+ will be labeled as Disk -1 and all traffic will be go though 331FLR.

If the disk is connected with 530SFP+ only, it can works prefectly.

PS1: that 530SFP+ is connected to a swicth with one port only, for Hyper-V VM traffics and iSCSI connection.

PS2: two connections are in single VLAN.

Am I missing any step?

1. Use Broadcom Advanced Control Suite 4 to assign IP to 530SFP+ iSCSI Adapter
2. Create iSCSI connection by using Windows ISCSI Initiator
3. Tested the connection is works
4. Change HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\mpio\Parameters\PDORemovePeriod to 300
5. In command prompt: mpclaim -n -i -d "HP      MSA 2040 SAN"
6. Create one more connection for 331FLR
7. Tested all connections are work
8. Reboot
9. The disk connected by 530SFP+ is labeled as Disk -1 and not working

Thanks

Cheong