I have a Proliant ml350e gen8 server with a fast blinking health LED. I already replaced the power supply. When I turn on the server, it shuts down automatically after about 2 to 20 seconds. The longer I leave it unplugged, the longer it stays on without shutting itself down. But without fail every time, it shuts down and then the fast blink red health LED appears. After it shuts down, I can turn it back on within a few seconds. The power light is amber when this happens. Here is what I have already tried:
- Replaced the power supply with a new one
- Tried a different power cord
- Tried on a different circuit
- Tried pluged straight to the wall without a surge protector or UPS
- Removed the CMOS battery for 5 minutes
- Disconnected the RAID backplane and DVD drive, power and data
- Disconnected one cooling fan, the one outside the cooling enclosure
- Tested each RAM stick one at a time
- Left all RAM out, the system gave a warning then shut down on its own the same way
- Tried the system maintanence DIP switch, S6 to on
None of those fixed the problem. Now I don't know what else to try. Does anyone have more ideas that I can try? One last thing, this server has not had any firmware or BIOS updates. And yes, it is definately a fast blink.
Thanks.