DL180 hpacucli shows all drives in one slot
Ho everybodyafter hotplugging four additional drives in a production server hpacucli shows all drives in one slot so i cant create a new logical drive:=> ctrl slot=1 pd all show statusls: Zugriff...
View ArticleAdding 2nd processor to ML350 G6
I'm getting ready to add a 2nd Xeon processor to my server. The server currently has a 460 Watt power supply. Will I need to upgrade or add a 2nd 460 Watt power supply to the server if I add a 2nd...
View Article136GB HDD on P440ar
Hi! I want to know if this [1] hdd model will works on a P440ar. Time ago on the QuickSpecs of a hdd controller we had the supported hdds, but it seems today this info it's not published. Thx....
View ArticleEnabling 2nd memory board/bus board
Hello, I have a Proliant DL380 G7 server and I need to enable to the 2nd memory/bus board on the server, I know it's in the BIOS somewhere, but I can not find where. I know I am missing something. Can...
View ArticleMixing PC3-10600 with PC3-12800 memory in my proliant servers
I've got the following three servers (all HP Proliant with single processors):DL380 G7 with nine 2048mb x 1333Mhz RDIMMs (PC3-10600) for a total of 18GbDL360 G7 with six 2048mb x 1333Mhz RDIMMs...
View ArticleCorrupted AD due to HDD failure
Hi,(Posting as adviced by a HP Server Expert @ Spiceworks)I have a DC and it the only DC I have. Recently I noticed an issue with AD. I have getting an error as in attached file. I can also see and...
View Articledl360-g7 password reset
Hi, I have one Proliant DL360 G7 Server. When I tried to enter the RAID configuration screen pressing F8 it asks for administrator password. But nobody knows it. I checked the service manual to reset...
View ArticleMoonshot-180G Switch Module
Hello everyone,we did follows at our 180G Switch Module: Booting the SwitchWhen the power is turned on with the local terminal already connected, the switch goes through Power-OnSelf-Test (POST). POST...
View ArticleUpgrading RAID 5 Disks to larger ones
Hi All, I have a DL380 G5 with a RAID 5 array contacining 4 x 146GB drives. I need to increase this to 4 x 300GB drives. The array contains exchange databases and is getting full. What is the best way...
View ArticleIdentify serial number on a HP ProLiant DL360e G8
Hello, I´m trying to setup the HP Smart Aray P420 controller on HP ProLiant DL360e G8 however I would like to open a technical case as I need some assistance. May I kindly ask how I may identify the...
View Articlessd firmware does not update
We’re currently testing SSD 2.5” disks from HP. Both are 1.6TB, one is SAS, one is SATAProducts:762263-B21 and 757339-B21 firmware was downloaded from...
View ArticleHP proliant DL380G6 - Expand Hard Disk
One HD running low on space. It's part of a RAID 1. I Could not do an in-place expansion using HP utility. Server does not have cache module/battery. Need to replace the HD with a larger one? What's...
View ArticleDL380p G8 1.2TB SAS Hard Drives pre-failure at a rate of 5 drives in 4 months.
DL380p G8 1.2TB SAS Hard Drives pre-failure at a rate of 5 drives in 4 months. I have replaced drives and drive cage, updated firmware, and sent reports to HP. Still no resolution. I'm wondering if...
View ArticleProblem with hp dl380 g8 and windows server install
hi I got a hp dl380 g8 server(with xenserver on midle )and i try ti install windows server 2012 R2 in a virtual machine .On windows startup load screen i get this error "Failed BIOS Lock This...
View ArticleDL360 G7 Xeon X5680 support
Hi, it seems Intel Xeon X5680 is not officially supported for DL360 G7 (but X5690 is). In some of DL360 G7 X5680 is working well and in others not at all (just beeping, no display). Both DL360 G7...
View ArticleNoisy Fan in DL80 Gen9
I am using a DL80 Gen 9 in AHCI mode with legacy boot . The fan is very noisy and it does not reduce fan speed after some time . Any solution......
View Articleml350e gen8 server has a fast blink red health LED even after replacing the...
I have a Proliant ml350e gen8 server with a fast blinking health LED. I already replaced the power supply. When I turn on the server, it shuts down automatically after about 2 to 20 seconds. The longer...
View ArticleDL180 G6 with 6Gbps SATA drives
Does anyone know of a HP array controller that supports 6Gbps SATA drives? I can't seem to find any and there are none listed in the quick sepcs for the DL180 G6. I have 6Gbps SATA drives operating at...
View ArticleDL580 G2 new rails won't fit in rack
I have an older server rack that has round holes with 10/32 size and thread bolts. Evidently the hp rails are used for the "square type" racks. How do I modify? Any ideas? Maybe I can buy like a 42U...
View ArticleDGE 530T rev-B2 NIC on ML350 G5 problem
I installed a DGE 530T rev-B2 PCI NIC on ML350 G5 PCI-X 100Mhz slot.The server doesn't recognize the card and no LED is on on the card. What's the problem? Is DGE 530T rev-B2 not compatible with ML350...
View Article