Hi,
i has a "special" DL320 Gen8 v2 server in our lab which i can not start the intelligent provisioning tool. I see a blinking cursor but after 10s the machine starts to boot from other devices (cdrom,hdd...)
I read a lot in the forum how i can flash the nvram but this did not work for me either.
A allready upgrade the SSP on the blade machine and install the last ILO version 2.7
- I try to flash the NVRAM by Recovery Media (HPIP171.2019_0220.23.iso & HPIP163.2016_0720.i192.227.iso) both of them fails with the same message - NVRAM Flash failure.
- flashing the NVRAM by HPONFCG Tool (hponcfg - linux) the reset command (-r) works fine for me but did not solve the problem.
- flashing NVRAM by HPONCFG and XML file stucks after command was typed and executed a temporary xml config file will be created but then nothing happens afterwards
- manually installing the provisioning version from rpm manuelly in linux works but did not solve the problem
Is there anything i can try more or do i have to assume that the ILO Chip is broken?