HPE Proliant DL20 NIC 2 Unplugged
I have a ProLiant DL20 GEN 10 server using Windows Server 2016 Standard OS. The server has 2 NICs. iLO is configured with IP Static: 15.10.254.11. Then in Windows Embedded LOM 1 Port 1 with IP Static:...
View ArticleHPE Proliant ML370 shutsdown unexpectedly
Hi,We have this HPE Server (mentioned in subject) running in Windows Server 2003. For the past several years, it's been working without any issue, until recently (a few months back) when we transferred...
View ArticleWould love to know What the warranty cover on HPE DL360 Gen 9 Server
I just purchased an HPE DL360 Gen9 E5-2620v4 1P 16G Svr/TV server and I would love to know what the warranty entails and what the warranty covers. I checked the HPE support website and it was not...
View ArticleHPE ProLiant DL380 Gen10 Server
i m from indonesiahello you can help me please ?i am get RSOD server when i update SPP,
View ArticleF10 and ILO Reset does not work for DL320 G8 v2
Hi,i has a "special" DL320 Gen8 v2 server in our lab which i can not start the intelligent provisioning tool. I see a blinking cursor but after 10s the machine starts to boot from other devices...
View ArticleWrite Back Cache Battery for ML150 Gen9 + Smart Array P440
Hi there,ML150 Gen9, Smart Array P440, cache battery model # 727258-B21 and the following POST error messages:313-HPE Smart Storage Battery 1 Failure - Battery Shutdown Event Code: 0x04001797 Write...
View ArticleiSUT how to upgrade only the firmware
Hi All,I am looking for the SUT command to update the system firmware only. I've checked the SUT CLI user guide but was not to find anything.Thanks,Nathan
View ArticleProliant ml150 g3 raid not booting after rebuild
hi, i have a ml150 g3 raid 1 with a disk failure, i've replaced the damaged disk with one of larger capacity hut same vendor (wd)on boot i pressed f8 to access hp embedded raid utility so i can rebuild...
View ArticleDL360 G7 Server Phantom Logical Drive
I am currently working on a DL360 G7 server, in which after a defective system board was replaced, the unit is seeing a phantom logical disk # 2, when there is only one physical and logical drive...
View ArticleClik here to view.
POST Error: 338-HPE RESTful API Error - Unable to communicate with iLO FW....
Hi All,I got this email alert after I upgrade the firmware using HPE SPP 2019.03.1(4 May 2019)and then followed by iLO firmware 2.70 May 07 2019POST Error: 338-HPE RESTful API Error - Unable to...
View ArticleHPE DL380 G6 not loading - two out of six coolers are faulty
Hello! I have a two-unit server HPE DL380 G6 (two processors). This server has 6 coolers (hpe 496066-001) . Two coolers failed. The server is not loading. Error loading: "1611-Fan 2 Failure 1611-Fan 3...
View ArticleML30 Gen10 fan so loud, can't work in the same room
I just bought a ProLiant ML30 Gen 10, during POST is normal that the fan is at high level of noise, but when boot to Windows Server 2019, no matter what I do, the fan is so loud, never stop working...
View Articlehp dl 360 gen 10 Não consigo instalar o windows server r2 2012
Não aparece os drives no momento da instalação.Google TranslationNo drives appear at the time of installation.
View ArticleServer rebooted
My HPE Proliant DL 380 Gen9 rebooted this week, with no reason. It is connected to a UPS. In the log files of the UPS there is nothing to see. In the logs of my server, there was just the power kernel...
View ArticleSmart Array P420 in Slot 2 CACHE STATUS PROBLEM DETECTED: The cache on this...
Hi there,We have ProLiant DL380p Gen8 with Cache Module error code 351.351 Smart Array P420 in Slot 2 CACHE STATUS PROBLEM DETECTED: The cache on this controller has a problem. To prevent data loss,...
View ArticleProbleme beim Server HP DL380p Gen8
Hallo Gemeinde,habe Probleme beim meinen Server HP DL380p Gen8 , der in einen Kritischen PCI-Fehler läuft wennich meine GRafikkarte unter ESXI 6.0 an eine Windows 10 VM durchreichen will.Install der VM...
View ArticleDL560 Gen10 was rebooted often by itself at dawn
Hi Everyone,We have a DL560 Gen10 that rebooted often by itself, especially at dawn.In the morning, we checked the Windows Server 2016's event log to find out, what's going on?In summary, we found...
View ArticleCache Module Status failed (battery is ok)
On my HP Proliant DL 380 Gen9 server I have an error.In ILO on the storage tab, the 'cache module status' is set to failed. However when I look at the HP Smart storage battery the status is ok.Any...
View ArticleML150 Gen9 - FANS and PSU FAN on when server is shutdown
I recently upgraded one of my lab servers to a ML150 Gen9 and noticed that when the server is shutdown the PSU Fan is still on (iLO says the server is off). Is this normal and apart from turning the...
View ArticleDL360P Gen8 - P420i - Controller Lock Up's
Hi folks,Seen a lot of issues and there sollutions over the last years, but this one is killing me.Im the private owner of a DL360P Gen8 and while testing this server, all went fine.When I placed the...
View Article