DL380 G5 won't boot past Broadcom NetXtreme II Ethernet Boot Agent
I have an old DL380 G5 that I use for learning and testing purposes, but suddenly it won't boot past the Broadcom NetXtreme II Ethernet Boot Agent v2.8.5.I then tried transfering CPU's and RAM to an...
View ArticleDL560 Gen10 turn off or slowing POST Fan Noise
Dear everyone,is there a way to DL560 Gen10 to turn off or volume down the POST Fan Noise?Thank you.
View ArticleHP ProLiant DL580 G7 Server: MIB's
Hello.Can't find MIB's for HP ProLiant DL580 G7 Server..10x!
View ArticleML30 Gen10 conversion to 4LFF hot-plug??
I've just received an ML30 Gen10, which turned out to have a plain DIY drive cage for 4 LFF drives. This is a little surprising for a 'server', particularly given that the vendor website showed images...
View ArticleDL180 G6, Smart Array P212, problem with cache battery
hii replaced battery for P212 cache with same part number 460499-001 and same spares number 462976-001 (same battery model, only manufacture date is different)in ssa i get error:"The cache for Smart...
View ArticleDL560 Gen10 temperature
Dear everyone,Sorry I wanna ask about DL560 Gen10 temp, especially within I/O Board [51-PCI 3 ] and [47-PCI 1], both in X=11, Y=11 , is it normal to have a 76'Celcius temperature in idle state?Thanks.
View ArticleUnable to ping ILO but able to ping gateway
Hello,i have configured Dl360 Gen10 HPE server. we have connected ILo cable and its blinking. Able to reach gteway but unable to ping server Ip address from my network. Need help on this
View ArticleDL120 Gen 9: Warning Authentication on this drive carrier failed due to a...
Hello, I have an issue about DL120 Gen 9 hard drive. I am using Smart Array B140i. My company bought a server DL120 Gen 9 whose drives are SP Solid State Drive 3 years ago. 3 weeks ago, one drive was...
View ArticleRAID5 disk with Degraded Predictive failure() and Unrecoverable Media Errors...
Hello everyone,I have a HP ProLiant DL380p, with a RAID5 with 4 disks, where I had 2 logical disks running on those disks. Yesterday, I notice that I had one disk with the followin status: Degraded...
View ArticleML350p gen8 Storage Controller Driver will no install
Good Morning All!I have an old girl we are trying to get going as a test environment to train people up in. The system will install Windows Server 16 fine. When I boot the machine it will not make it...
View ArticleLogical Drive Not Visible
I have a new ML 110 Gen 10 server. 2 physical drives on which I have created a single array with 2 logical drives. One smaller logical drive for the operating system, one large drive for data. I...
View ArticleEnable HPE Proliant Update , Third-Party Software Updates in SCCM
Hi , I am trying to install the Drivers for Gen8,Gen9,Ge10 via HPE ProLiant Updates Software Updates via SCCM so far I have enabled Third Party updates and created a custom catalogue and gave Download...
View ArticlePCI Bus Error (Slot 0, Bus 0, Device 0, Function 0) logged on stuck reboot...
Hello, a server DL380 Gen9, with Windows Server 2016 installed hangs on reboot and only can be started by Cold booting from iLo.The IML logs Critical errors:PCI Bus Error (Slot 0, Bus 0, Device 0,...
View ArticleCustom SPP for gen8
When going to Custom SPP site I can't seem to be able to create a custom baseline that would include Gen8 based hardware. Is it not possible to create one anymore? Do I have to take the whole 8.1 package?
View ArticleClik here to view.
DL 560 Gen 10 and problem with RAM
Hello, we have DL560Gen10 server with 4x Xeon(R) Gold 6144 CPU @ 3.50GHz and 48 modules of 64GB @2666LRDIMM DDR4 RAM (p/n 840759-091) and have big problrm with memory moduls on 1-2 CPU, - some looks...
View ArticleHardware monitoring HPE Gen 10 servers with event notifier replacement
Hi all,we were using HPE servers for many years, starting with DL380 Gen6.Up to Gen9 we were using the built-in tools such as HP event notifier, SNMP service, HP system management homepage, etc. to...
View Articlecan't boot up the CentOS7 after upgrade the kernel from 3.10.0 to 4.4.189
The CentOS is newly installed with a USB stick. I can get in the Centos7 normally with the default kernel 3.10.0. =================================================however, after I upgrade the kernel to...
View ArticleMemory Present/unused 10Gen Server
Dear all, I've HPE server 10Gen 360. I've 4x16GB RAM, one of them showing "present/unused" when accessing from iLO. any idea what is missing?troubleshooting: swapped memory locations. but problem still...
View ArticleDL160 with P420 - CACHE STATUS PROBLEM DETECTED
We have som problem with our DL160 Gen8 server with a Smart Array P420 disk controller.Suddenly it started reporting like this:------------------------------------------------root# /usr/sbin/hpssacli...
View Article3.5' drive cage for ML350 Gen10
Hi GuysWe purchased a ML350 Gen10 server for our office and it came with SFF hard drive cage. This allows us to install 8 x 2.5" drives. We want to use 4 LFF drives. I have spent time with HPE...
View Article