Converting a DL360 from SFF to LFF drive bays
I'm interested in a DL360 for my home lab, but most of the servers I see for sale are configured for SFF drives. I believe (sure I've seen them) that it is possible to configure the DL360 for LFF...
View Articleadd 4 more physical disks to my server (Proliant 350p gen8)
I am looking to add 4 more physical disks to my server (Proliant 350p gen8) that already has 4 disks in RAID10. I have seen online others say that in-order to expand the RAID array, it requires a RAID...
View Articlepower_meter ACPI 000D: ignoring unsafe software
i tried to install my os through DL380 GE 10 and i meet error :power_meter ACPI 000D: ignoring unsafe softwareUnknown compression:deflatecan't read CTR while initializing i8042with usb key my Centos os
View ArticleDL360 G7 Memory speed on 800MHz
I have a DL360 G7 with several memory modules (1333MHz) and a CPU E5630. The CPU can handle 1066MHZ but with dmidecode I see that all memory modules are running on 800MHz?
View ArticleProliant Microserver Gen 10 power off by itself
Hi, I have 2 customer with Proliant Microserver Gen 10 with Debian 9.5. This servers power off himself and I can't understand why. We have 2 hdd in RAID and 1 SSD installed in the upper slot with the...
View Articlemmio / mem BAR setting for dl380p g8 [Solved Ctrl +A ]
[Your bios only has 32bit resources enabled. Try to reconfigure PCIe (mem BAR) address space (MMIO) settings in RBSU/BIOS (something like "MMIO above 4G" or "Above 4G Decoding", or "MMIO base" set to...
View ArticleHP ProLiant DL380 Gen9 - Smart Array P440ar - Cache module status: Failed
Hello,I have an issue with Smart Array P440ar in HP ProLiant DL380 Gen9it was started with failure: Smart Storage Battery - I replaced to spare part: P01366-B21and error with the battery was gone, but...
View ArticleСостояние модуля кэширования - Ошибка
Добрый день!При работе ProLiant DL380p Gen8 возникла ошибка у модуля кэширования HP Smart Array P420i ControllerНа форуме нашёл описание подобной...
View ArticleСостояние модуля кэширования - Ошибка [Cache Module Status - Error]
Добрый день!При работе ProLiant DL380p Gen8 возникла ошибка у модуля кэширования HP Smart Array P420i ControllerНа форуме нашёл описание подобной...
View ArticleDL380 Gen9 Embedded diags reports system board failure
I have a DL380 Gen9 that was working fine until I restarted it yesterday. It shut down, but when coming back up it finishes post and starts booting windows, and just about when I would expect to see...
View ArticleHp proliant ml150 g6 gives out bmc crash
My ml150 g6 wont boot and gives a out warning saying the sytem bmc gernic f/w crashed bmc is in recoverwhat can i do to fix it it worked great in the past
View ArticleHelp with setup - DL360E
Hi all,I've recently purchased a DL360e second hand. and I'm having problems getting into ILO. At the moment I've tried a few different ways of re-installing and resetting but have had no luck. So far...
View ArticleDL380e health
I've been handed the reigns of an old G8 DL380e that runs the office I work at. I found the HP Array Config Utility, which lets me keep track of the drives, and I found the HP ProLiant Integrated...
View ArticleRAM compatibility with Proliant DL380p Gen 8 server
I have Proliant DL380p Gen 8 server running.It has 256 GB RAM. It uses HP part number 647653-081 , total 16. Now I need to extend another 64 GB in it.I have below RAM parts with me: 5 * 16GB 2R*4...
View ArticleDL20 G9 System Battery
Hi I would like to check on the System Battery part number for DL20 G9 . I could not find this information in the Quick Specs, User Guide, Maintenance and Service Guide. Is it using CR2032?Thanks.
View ArticleML350e Gen8 truble installing operating system
I'm trying to install an operating system to my B120i Raid array. When I enter the Smart Storrage Administrator all three array controllers and drives show up. When I boot from a Bootable drive when I...
View ArticleI need help updating the firmware on my ml150 g6
I got problems with my ml150 g6 gives me an warning sayig i need to re-flash the bmc generic f/wBut how do i re-flash it i'm unknown to it all can somebody give me an step by step on how i can do it by...
View ArticleClik here to view.
Intelligent provisioning all time reboot
Hello.I have update firmware about intelligent provisioning on my ml30 gen10 and when i press f10 on boot, it shows all time it is being updated and then reboot system. I cannot to access intelligent...
View ArticleIssues getting into Intelligent Provisioning - DL360E (Gen8)
Hi all,I'm currently having problems booting into Intelligent Provisioning, I've attempted to re-install using the recovery media (v1.71) and had no luck. Each time it attempts to re-install I'm met...
View Article