HP DL380p Gen8 and PCIe SSD?
Hey, We decided to by a new server.I looked everywhere and couldn't find any solid answer to this:Does HP DL380p Gen8 support PCIe SSD? Is there a capacity limit? I'm thinking of Intel DC P3600 400G...
View ArticleILO Advanced Part Number
Hi to all and sorry for my English, i hope to be in the correct section for p/n information. I have a unpacked license of HP ILO Advanced NM 1-SRV LIC with P/N 452141-B21 Can I use it on Server HP...
View ArticleBackup Raid 0 Drives on ProLiant DL160 G6 with B110i
Hello, I have a ProLiant DL160 G6 with B110i software RAID controller.It runs eine logical RAID 0 drive consisting of two physical SATA disks.One of the disks now shows that it will fail shortly - so I...
View ArticleQuestion about DL 580 G5 CPU upgrade
I'm considering going from quad core to the hex core. Do I need to upgrade all 4 at the same time, or can I do it individually, or do the CPUs have a matching pair?
View ArticleVERY URGENT HELP PLEASE! PROLIANT ML370 G2 STUCK on standby!
Hey there! I need really urgent help, my PROLIANT ML370 G2 needs to be working tomorrow morning at 9am and i don't know what else to do anymore. I turned off my server for around 1hour. After that, all...
View Articleintelligent provisioning for Gen8
Hi, Seems to be that version 1.62 was the last IP for Gen8. Versions 2.x says hardware not supported.But where one could download it ?
View ArticleUnknown device in G9 server
Hi,I'm in the process of building a DL180 G9 server. It was built via 2012 R2 media and has had the SPP applied without issue. All but one of the devices listed has an appropriate driver installed. I...
View ArticleWill Smart Array hp421 controllers work on DL380 G7
can some one help we orderd 4 x smart array 410 controllers for a dl 380 g7 servers .Hp sent smart array hp421 controllers as the hp 410 have become obsolete ,will the smart array hp421 conrtolers work...
View ArticleProliant ML150 G5 - Understanding raid configuration.
I buyed a new ML150 G5 (450162-421). I don't understand wich combination are allowes with the six sata port on the motherboard. I have this storage devices: 3 hard disks 1 Iomega Rev 1 Dvd Rom I would...
View Articleburning HP ISO images to flash drive
Hi, When using "default" utility - "HP USB key Utility", version 1.7 - process of burning is always slow, now trying to burn new SPP - lasts hours.There are a lot of other utilities, for example "Rufus...
View ArticleBad Memory module
I purchased 3 drives for a ML350 G6 Server to set up a RAID 5 array. I didn't realize until after I installed them that I needed a memory module to get RAID 5 to work. I found the part, 462967-B21, and...
View ArticleHP Proliant ML350 Gen9
Hi all, recently I have bought a new ML350 Gen9 SFF and I am trying to change from SFF to LFF. I can see in the QuickSpecs PDF the LFF cage part number but I think that buying this part is not enought....
View ArticleDL180 G6 LO100 keys and mouse don't work!
I have this one server that appears to have all USB ports disabled. So now I can't get into the bios and the KVM isn't working. I can get logged in and the KVM launches, I can see the screen and...
View ArticleHP SUM - Configuration not persistent
I spent hours setting up nodes and node groups in HP SUM, only to find them all gone with I launched it again. Is there a way to make the configuration persistent?
View ArticleDL380 G6 Temp sensor fault
Good day all.I have 2 DL380G6 servers.One of them due long test from HP support CD fall with message temp sensor 29 fault.ILO2 show me 0 value for this sensor.I found on web next page...
View ArticleGen9, H240 - Set HBA Mode for Tape
Hi,Not sure if this should be in the server or storage forums so I will try here.Have a HP Ultrium 1760 LTO 4 Tape drive connected to the H240Short version is I am having an issue, and in the...
View ArticleMonitoring
Hi all, i wnat to monitor the basic health status of a couple of HP servers. What would the best software be to achieve this? HP SIM?
View ArticleML 350 G6 memory combination
Hi, I have a Proliant ML 350G6 with 4GB of ram in two 2GB bank. They are installed in channel 1 an channel 2, slot 3 and slot 6. I'd like to have 8GB of memory adding only more two 2GB DIMM's, is this...
View ArticleDL380 G7 Raid 10 drive to 8 drive array 4TB
We have a DL380 G7 with the 410 conroller and 4 SAS 1Tb drives configured in Raid 10.Today I installed 4 more 1 TB drives and can see them in the HP array software, with the option to add them to the...
View ArticleDL380 G7 Raid 10 with 8 X 1TB booting to 2012 bios issue?
We have a DL380 G7 with the 410 conroller and 4 SAS 1Tb drives configured in Raid 10.Today I installed 4 more 1 TB drives and can see them in the HP array software, with the option to add them to the...
View Article