NVMe on a DL380p G8
Hello,I've recently installed an NVMe drive onto a PCI-e adaptor, and installed it into a Dell R610, which is older than a Gen8 DL380p. This worked, using a USB to boot from and the NVMe drive for the...
View ArticleClik here to view.
P420i - Parity initialization failed
Hey there,we got a DL380 Gen8, P420i Controller, 19 SSDs - 3 Arrays, 3 logical Volumes, 2 OK, 1 with Error "Parity initialization failed" ... already searched for this Failure - but haven't found...
View ArticleProliant DL380 Gen9
Hello was hoping for some assistance with upgrading the Firmware and Bios for a Proliant DL380 Gen9 and take it to a later version of esxi. I intend to use a USB to perform the update.iLo is not...
View Articlehp proliant dl380p cannot detect storage controllers
hp proliant dl380p cannot detect storage controllers
View ArticleFAN & ILO4 issue: DL380p Gen8 with Dual Xeon 2660 v2
I'm having a problem with one of my Proliant DL380p'sThe ILO4 sometimes reports an ip address but all the time it says its not available and F8 gives up and moves on to the boot order. No response when...
View ArticleHp Proliant DL380 G7 Issue
I can not reset ilo settings to the default setting because i can not access webpage or change any settings from smart start cdI tried using reset button but it is not working .. the alarm saying ilo...
View ArticleHow to Microsoft Hyper-V 2012 R2 Cluster with 4 nodes (four HPE ProLiant...
My Boss got 4 HPE ProLiant DL300er Series (Generation 8) and one HPE Storage Enclosure 3000er Serie yet. Is it possible to connect all 4 Servers with additional HPE SmartArray 421 (or better HPE...
View ArticleNVMe in DL360 Gen9
Hi.We have a DL360Gen9 Server, that have a 2 NVMe ports. How we can configure a raid 1 on this NVMe disks?
View ArticleCloning a server using a drive from a broken mirror
I'm trying to clone a working DL360 G9 with a single RAID 1 array on a SmartArray P440ar controller. I have broken the mirror and used one disk to rebuild the array on the original machine. All is...
View ArticleDL360 G5 Change from RAID1+0 to RAID5
I have a DL360 G5 Server with a Smart Array P400i Controller (Cache Module and working battery is present). All 6 SFF Slots are equipped with 300GB SAS disks which are currently configured as a...
View ArticleSCCM Proliant Integration
HiWhat is the latest option for Proliant integration with SCCM? The Proliant Integration Kit for System Center seems to have been deprecated. There seems to be a sugestion of using "Oneview", but I...
View ArticleDL 180 G9 parity initialization 0 %
Hello everyone. My backup server Dl180 G9I create raid 5 but progress 0% ( 8 * 4tb Sata) I was test all device, all hard disk... Now i test 3 * 4tb sata for Raid 5 but it's all the same. I test RAID 0...
View ArticleFirmware for ML350 G6?
HelloSince the merger/demerger I cannot find the up-to-date BIOS downloads for a HP ML350 G6 server, can someone be kind enough to find and link me please?
View ArticleMigrating the stripe size on a HPT GEN9 Smart Array Controller
Can I migrate the stripe size on a HPE DL380 GEN9 Smart Array Controller with no loss of data?I know there is an option in SSA to perform this. But my question is is this non-destructive ? Does this...
View ArticleProblem with ilo2 and DL380 G6 and power on
Here is my situation, i have 2 old DL380 G6 which i use to run some of my VM Admin stuff like Log Insight etc.I upgraded the Ilo 2 to version 2.33 03/20/2018So far so good, i used the ILO to reboot my...
View ArticleDL380 Gen10 in UEFI shell,the USB media drive cannot be recognized.
Hi I just wanna collect the AHS log in UEFI Shell via iLO,but when I mounted a USB drive that capacity is 32G with FAT32 format and typed "map -r" command,the USB drive cannot be recognized,is there...
View ArticleDL160 G6 P410 F/W 1.58 , is it possible F/W update lastest version 6.64...
DL160 G6 P410 array controller F/W is 1.58, is it possible F/W update lastest version 6.64 one step? Centos 5.3 used.Please help.Thank you.
View ArticleHp Proliant ML150 G5 Windows Server 2003 Setup "no disks found"
Hi all,I've bought a used ML150 G5 that I want to install Windows 2003 on.The server already has a Win Server 2003 installation but the previous owner has forgotten the admin password so I can't...
View ArticleHPE PROliant DL360 GEN10 No Physical Drive Found
We purchased a new machine PROliant DL360 GEN10 with a Disc drive 7.2K SAS DS 1 TB when we try to configure/format the drive we get "there are no configurable physical drives attached to the...
View ArticlePower cut automatically in HP ML Prolient 150G6
Hi Experts,I have a problem in HP Prolient ML150 G6 that is after 1 to 2 hours running the server is power off automatically. The running operating system on this server is Microsoft Windows 2008 with...
View Article