can any one suggest how to change ip of current configuration of DL370-G6...
how i modify the ip address of current configuration in DL370 g6 from ilo2 cli. please can any one help me.
View ArticleDL380 Gen10 displays is blank on a APC 19" RACK LCD Console
Our new DL380 Gen10 shows a blank screen on a APC 19" RACK LCD Console monitor (AP5719). Keyboard works just fine but no screen display. Firmware is all up to date. KVM-USB has been swapped out...
View ArticleConfiguration Task in HP Smart Array Gen 9 Controllers
Please I have a doubt and I was reading in HP Smart Storage Administrator User Guide,Edition:4,Year:2015,page 6 it is said that the procedure:Configure RAID 1 Advanced Data Mirroring (ADM) and RAID 10...
View ArticleRAID 5 on Proliant DL380 G7 - Double HDD failure
Hi all,Could someone help me please, this situation is quite critical for me:I'm an IT enthusiast however all my knowledge comes from self-learning since 1999, and not exactly from formal training. The...
View ArticleGen 7 DL385 - Fan Error/Failure
HiWe have a series of Gen 7 servers in our rack. One particular one is giving me grief. The error/failure is related to fan 2. One minute it seems to think it isn't in the system and then suddenly it...
View Articleinstalling windows server 2016
Hey guys so i just got a fresh hp proliant dl370 g6 with four SFF 160gb harddrives. I've tried installing vmware and that worked but im now looking to install windows server 2016 but everytime i get to...
View ArticleDid ML150 G6 receive a microcode update?
Hello,i want ask, to HP Plans to release a microcode update about spectre for the oldish server?
View ArticleDL180 G9
Sir I have installed Ubantu server 16.04 on DL 180 G9 and doing USB Tethering for Internet on it but I cannot connect to Internet
View ArticleAbout RAID 1 in hard disk drives
Some days ago I sent a photo about two disks but in this case they are not mirror because it was explained that for a mirror ,both physical drives would need to be a part of the same array,and the...
View ArticleiLO2 is set up but I'm unable to log in.
Hello, I'm somewhat of a rookie at this. I purchased a used Proliant ml350 G6 to help me learn so I have something here at home to work with.I followed the instructions I found for setting up iLO3 on...
View ArticleHP ProLiant Server Memory Upgrade Kits
Looking for an inexpensive upgrade for your HP ProLiant Server?Check out Cloud Ninjas for HP Server Memory Upgrade KitsSome pretty sweet deals. Worth a look.Have a good weekend.
View ArticleSPP 2018.03.0 hp-health and hp-snmp-agents failed to start : hpasmlited ILO...
hp-health & hp-snmp-agents failed to start with error : hpasmlited check_ilo2: BMC Returned Error: ccode 0x0, Req. Len: 15, Resp. Len: 21 hpasmlitedThe Integrated Lights-Out Management...
View ArticlevSphere/vSAN 6.7 and Proliant Gen8 Support
Hello,I know that vSphere support is dependent upon our partners deciding to maintain certification of hardware. With milestone releases like 6.7 that released this week, it seems as though HPE is...
View ArticleDL380e Gen8 ILO and health problems
Hello everyone.I have recently purchased a used HP Proliant DL380e Gen8 server, but I'm unable to start it. It powers on, all FANs are running, but nothing more. The health LED blinks red, indicating a...
View ArticleMigrating the stripe size on a HPT GEN9 Smart Array Controller
Can I migrate the stripe size on a HPE DL380 GEN9 Smart Array Controller with no loss of data?I know there is an option in SSA to perform this. But my question is is this non-destructive ? Does this...
View ArticleI need drivers for ML350 G6; for windows server 2016
I am missing IPMI Interface & base system Device.Also was here an heath program that monitor everytning.
View ArticleChecking / updating firmware DL-380 g7
Hi, i'm new i have a DL-380 G7 and i am running a windows 2016 server OS.I want to check what frimware versions i have on my server and update them if neccecery.can anyone point me in the right direction?
View Article207 memory initialization error on processor 1 SOCKET 6
DEAR SIR TODAY I REBOOT THE SERVER THIS ERROR IS COMMING207 memory initialization error on processor 1 SOCKET 6 BUT NOW SARVER IS WORKING AND LAST ONEMOTH SYSTEMS SOME TIME GETTING SLOW...
View ArticleInstall Windows XP SP3 on HP ProLiant DL320 G6
I am trying to install Windows XP Professional SP3 on DL320 G6 Server. I know HP doesntsupport Windows XP. I have integrated the drivers for RAID, B110i controller for WindowsServer 2003 along with...
View ArticleCan't access into Intelligent provisioning
When I’m trying to access intelligent provisioning (HP ProLiant ML310e Gen8 2 ) using F10 it didn’t appears. Instead accessing to intelligent provisioning, after one beep it boot the operating system.I...
View Article