hp proliant ml110 g7
Hello and good day. Ive encountered problem with my hp proliant ml110 g7. One day it just stopped working.When i start PC first it tries to start fans start to spin and after some seconds it goes off...
View ArticleStorage controller should be able to handle 8x sata, it can handle more?
Hey everyone, I have a question regarding the HP Smart Array P410 that's comes shipped in the HP Proliant DL 180 G6. It is stated in the specs that it can handle 8 sata disks, but the case itself has...
View ArticleiLO4 FW version 2.55 SSL certificate import errors
We have SSL certificates generated from DigiCert, using CSRs from the iLO cards, whenever we attempt to import the certificate into the iLO we get this error:Error: The Certificate could not be...
View ArticleML350 Gen 10 Intelligent Provisioning issues
Hi,Looking for some help. Just starting setting up a new ML350 Gen 10 server and having problems with Intelligent provisioning. I have to say, compared to our Gen 8, the interface for this and all the...
View ArticlePROLIANT DL185 G5 W/ P800 CONTROLLER WONT BOOT
I have an HP Proliant DL185 G5 Storage Server w/ p800 Controller. After booting it said battery 1 and 2 were bad and needed replacing. I removed the P800 and removed battery 1 (extremely swelled) and...
View ArticleIntel Spectre/Meltdown BIOS Update planned for the Nehalem DL160 G6 Series?
Is there a forthcoming BIOS update planned for the ProLiant DL160 G6 series (e.g. E5504 - Nehalem)?E.g. ProLiant DL380 G6 (E5504 - Nehalem) has the latest Intel Spectre/Meltdown code in 2018.02.22...
View ArticleSSD NVMe is not supported for Raid !!
Hello,I have just got a new server ProLiant G10 with 3 SSD NVMe. The surprise was that HP server does not support RAID configuration. I was told that I have to dedicate one expensive SSD only to...
View ArticleWhat is the recommended RAID with SSD NVMe?
Hello,I searched the net and where I found two different opinions about RAID with SSD.With SSD RAID 5 is fine and no need to go for RAID 10 to get better...
View ArticleServer memory upgrade for HP ProLiant ML10 v2 (compatible memory modules &...
To the able engineers of HP, I have a HP ProLiant ML10 v2 with 4GB memory. It serves as a pfSense firewall, router and squid server. The memory is almost all the time in 65% usage due to several heavy...
View ArticleMl350 g6 drivers
hello guys,i have a ml350 g6 server for school but now i have windows server 2012 r2 installed on it but the problem is dat me nc375i integrated quad port multifunction gigabit server adapter is not...
View ArticleAlternative SNMP insight monitoring ml350 gen10
Bonjour,Sur les serveurs Proliant ml350 Gen9 il y avait insight qui fonctionnait avec le role snmp en dépendance pour pouvoir monitorer l'etat des disque dur ou autre composants.Sur les serveurs...
View ArticleHP ML350 G6 No POST, NO VGA
Greetings & SalutationsI have just purchased a ML350 G6 and it will not POST or Show any form of VGA output. when i plugged in the VGA cable to the servers onboard VGA port nothing displays at all....
View ArticleDL 380 Gen 10 fan noise issue
Dear all, i have installed DL 380 Gen 10 server at customer site and after 48 hours server start noise contineously and when i power drain the server issue is resolved . the same issue accours an other...
View ArticleHome server died, ideal replacement with SFF+LFF support?
Is there a model of ProLiant server along the Gen 7 or Gen 8 line that will support 8 SFF -and- 3 or 4 LFF drives?My home lab server (an ML350 G6) died after an extended power outage and the following...
View Articleml350 g5 upgrade cpu from x5345 to x5460
1.I am with the 2007 BIOS -after installing x5460 -system strats fan@ Iam guewssing 100&% and remains in that state the relevant health and light diagnostics are green/show no errors. 2.If tyhis is...
View Articleml350 g5 upgrade cpu from x5345 to x5460 saystem not booting
1.I am with the 2007 BIOS -after installing new cpu x5460 -system powers up fan@ Iam guessing 100&% and remains in that state - no boot - derspite the relevant health and light diagnostics being...
View ArticleMOVE MY DISKS FROM SERVER 1 TO 2
Hi Guys,I have a server (dl160 g8) which is down and wont start up. And i just bought a new server (DL180 generation9(8sff))I have 4 hard disks that i would like to use on the new server what is the...
View ArticleUpgrading Proliant ML370 G5 from Xeon 5140 to E5440
Hello,We have a Xeon 5440 and the HP Proliant ML370 G5 running with a 5140 Xeon processor and we'd like to upgrade that server with it.Unfortunatly, it's not running with that proccessor yet and is...
View Articlechange iLO "from" address in mailalert
Hi,I'm using several ProLiant DL360 Gen9 servers with iLO 4 v. 2.55I tried to config the AlertMail feature and ran into a problem with the "from" address, the server is sending the mails with. Our...
View ArticlePower supply for Proliant ML350G4
Is possible to use in the ML350G4 Proliant Server as a Replacement the Power Supply P / N 382175-501 from Proliant ML350G4P?Thank you for the Recommendation.
View Article