has my reseller sold me an already used ML110 g10?
Hello!I bought an HP ml110 g10 on April 26 online and received the device yesterday. This is the first time, i own a new proliant, before i always had old, used HP servers for my homelab.Today i wanted...
View ArticleHDD Physical Form Factor matter to Server
Dear,I have a DL380 G7 Server that have only 2 LFF Bay.I want to buy a Hard Disk Drive for Server, the HDD that i want to buy is 2*1.2TB 6G SAS SFF (2.5-inch).my question: Is HDD Physical Form Factor...
View ArticleHP proliant dl380e gen8 - Access home server/iLO over VPN ?
Hey All, Just a bit of personal back ground. Im relatively new to networking/servers. Passed CCENT last week and studying towards MCSA 2016 Win Server certification. Working in a GPS related industry....
View Articleml350p: p420i replace with H220 for not using raid but ssds
I'm new to HPE products, and I have purchased a used ml350p which I plan to use sata ssds. It will come with a P420 and it would seem the H220 might be a good choice for HBA mode. Can I remove P420i if...
View ArticleHPE Proliant DL380 Gen10 Windows Server 2016 Performance Counters driver
Hi,I would like to request the windows driver for Windows 2016. I have tried update network adapter but still couldn't find correct driver. Please help.Performance...
View ArticleHPE Smart Storage Administrator Konfiguration ERROR 2877
Guten TagIch will meinen Gen9 ProLiant DL380 via HPE SSA scripting konfigurieren, jedoch bekomme ich immer die Error Meldung "2877 There are no suitable spares available [Es sind keine geeigneten...
View ArticleHP Proliant ML350 Gen 6 RAM error
Hi. I have a small problem with my server. I have put 12 2 GB DIMM blocks into the server and followed the order on the cabinet A, B, C and so on. And it boots perfect with the 12 ram blocks. But when...
View ArticleProLiant DL580 Gen9 missing drivers
Hi,We have one of these servers and in Device Manager it has lots of unknown "Base System Devices" - what's the best way to resolve this - just asking Windows to find the best device or any tools from...
View ArticleCPU x5690 not working on DL160G6!
Hi,We're upgrading CPUs in Hp Proliant DL-160G6 from 2 x Intel Xeon x5675 to 2 x Intel Xeon x5690. When we mount x5690 cpus , server doesn't boot. We've also updated the bios but still in vain.These...
View ArticleProliant ML350 Gen9
HelloI am using a Proliant ML350 Gen9 running server 2012 R2I have error 313 HP Smart storage battery 1 failure. i replaced my harddrive and the new hardrive sometimes makes a knocking sound, i am...
View ArticleHP infosight for HP DL380 G9 Servers
Hi,Since HP infosight is now available to DL Servers for G8 and G9, is there a need to shutdown my server when upgrading firmware or installing HP infosight to DL380 G9 Servers? Thanks,Jekoy
View ArticleClik here to view.
Dl380 Gen9 (CPU E5-2640 v3) Unexpected Reset
last month we faced twice unexpected reboot server DL380 Gen9 with following error message:I found that error messages was exactly (scenario 2 and scenario 3 ) described inside Advisory: ProLiant...
View Articlehp dl360p Gen8 drive array controller failure slot 0
Hi All,Recently updated RAID controller firmware version to 8.32 after a recent lockup of the RAID controller on a DL360pGen8 causing the server to freeze with the following message log in the hp IML...
View ArticleiLO SNMP Pass-thru
Hi,I am trying to understand the purpose of iLO SNMP Pass-thru.What are the main reasons for using it?Will it pass SNMP Traps through to the HOST operating system, and if so would a RHEL 7 snmpd...
View ArticleNIC teaming or NIC bonding
Do, or did, the DL360PG8 servers allow for NIC bonding/NIC teaming (whereby a single IP is used for two (2) separate network interfaces)?
View ArticleHP Proliant DL580 Gen8 and GPU's
Dear all,I'm a PhD student at KU Leuven university. I have a HP Proliant DL 580 Gen8 server with 3 GPU's at my disposal. Lately we've been experiencing full system shutdowns. The main thing that has...
View Articleml350p g8 sata non-sas hard drive install above dvd
New to HPE server HW; I have ML350p g8 with bottom SAS cage with two HD installed. I have two 2.5 ssds, one boot, another for general data that I have on mb sata 1 and 2, dvd on sata3. What parts do I...
View ArticleHow best to manage firmware for Proliant Servers running ESXi
What's the best way to manage firmware for the Proliant servers? I have DL 380s some with Gen 9, some with Gen 10. Is there a better way to manage firmware than booting from the iso on the ILO port...
View Article2400-Slot X SAN Error - SAN link is down
DL380G10-HBA SN1000QSymptom : 2400-Slot X SAN Error - SAN link is down. SAN connection not possible.?????Can i help me?!
View Article